Cold Saw/V1 Design Files/Shaft Block

From Open Source Ecology

< Cold Saw‎ | V1 Design Files

Revision as of 01:12, 28 May 2012 by YK (talk | contribs) (→‎Shaft Block)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Shaft Block

Length: 76.2mm

Width: 50.8mm

Height: 100mm

Support Shaft Hole Diameter: 31.8mm

Support Shaft Hole Spacing Along Length: 38.1mm

Support Shaft Hole Spacing Along Height: 65mm

Mount Hole Diameter: 12mm

Mount Hole Spacing Along Length: 10mm, 65mm

Mount Hole Spacing Along Width: 25.4mm

Mount Hole Depth: 50mm

2D Image

3D CAD STP

File:ColdSawV1ShaftBlock.stp

2D Fabrication Drawing PDF

File:ColdSawV1ShaftBlock.pdf

2D Fabrication Drawing DXF

File:ColdSawV1ShaftBlock.dxf

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Cold_Saw/V1_Design_Files/Shaft_Block&oldid=63891"