CEB Press/Current Downloads

Overview

This page contains a list of the most up to date files that have been uploaded to the OSE Wiki relating to the CEB Press fabrication. This list is an attempt to organize the latest critical CAD data, spreadsheets, code, etc for the current revision into one location. Since this compilation is based on an outside interpretation of current work completed at Factor-e-Farm, those who are better informed should feel free to make corrections.

The latest documentation for the CEB Press is currently available for the revision 4 or "CEB Press prototype IV"

CAD Data

• This PDF appears to be the latest 2d shop drawings for revision IV. Per the CEB Press page; "corrected after September 24-28, 2012 Collaborative Production Run, and needing many corrections after November 23, 2012 Collaborative Production Run."
  • File:CEBIVFab.pdf

• These files are supposed to be the the 3d model of the complete assembly (revision 4); however, there have been a few issues reported with these assembly files.
  • STEP AP203 - File:CEBIV.step
  • STEP AP214 - File:CEBIV2.step
  • STL - File:CEBIV.stl
  • Parasolid x_t - File:CEBIV.x t
  • x_b File:CEBIV.x b
  • 3DXML File:CEBIV.3dxml

• This zip file appears to be the original Solidworks design file that was used to create the 3d model for Revision IV. When I import this file into Alibre Design software, it does not appear to import all of the parts.
  • Solidworks - File:CEBIV-new.zip

• These files are dxf files that can be easily imported into CNC cutting machines (i.e. laser-cutter, waterjet, plasma, or torch cutter). These files were introduced in the OSE Christmas Gift to the World 2012. Having these files machine cut would save a large amount of time that would otherwise be spent sawing material and drilling holes. These parts are blanks that are welded together (in most cases) in order to make the parts detailed in CEBIVFab.pdf listed above.
  • File:CEB frame.dxf - 1/2" steel
  • File:DrawerCAM.dxf - 1/2" steel
  • File:Arms CAM.dxf - 1/2" steel
  • File:HopperCAM.dxf - 1/8" steel
  • File:Others CAM.dxf - 1/2" steel

BOM

• This spreadsheet appears to be the master bill of materials as well as an index to CEBIVFab.pdf listed above.
  • File:CEBIVIndex.ods

• This steel bill of materials includes 1/8" and 1/2" steel, plus hydraulics, cam rollers, and bolts from November 23, 2012 Collaborative Production Run. The steel order is minimized to include those parts not covered by CNC torch table cutting -
  • File:Sweigerxmas steel.ods

Software

• this is the program file that runs on the Arduino micro controller that is installed on the CEB Press.

File:CEBOperationTest.ino