CEB Press 6 - Controller Module - Electronics Schematics

From Open Source Ecology

Jump to: navigation, search

Introduction

CEB controller, built around a Teensy++2.0 [1]. Single-layer board with wide traces/spaces (no space below 0.35mm) designed for milling, phototransfer+etching, or ink/toner transfer+etching.

Downloads

16 FET version, suitable for future tractor automation, with onboard fuse and LEDs and single 6-pin connection to solenoids - File:CEB16FETfuse.sch

Version without on-board fuse - File:CEB16FET.sch

10 FET version, using smaller board. - File:CEB10FET.sch
Both files above in Eagle format. See also CEB_Press_6_-_Controller_Module_-_Electronics_Layout

File:Controllerlayout.jpg

Retrieved from "https://wiki.opensourceecology.org/index.php?title=CEB_Press_6_-_Controller_Module_-_Electronics_Schematics&oldid=120853"

Pages with broken file links