D3D Universal Build Pictures and Video
Contents
Build
Cut List
- [6] 8 mm rods, 12" each
- [1] 8 mm rod, 3D printed,
- [1] 2x12 lumber, 12.5" long
- [3] belts, 26" long
Instructions
- Make the heater block - inserting the thermistor, heater, nozzle, heat break, and nut.
- Need to heat tighten.
1/2 mm space under the hex tip of the nozzle.
D3D Universal Axis
Platform on stilts so extruder reaches bed:
Nozzle does not reach bed:
Extruder Build
Plotter Build
