File:D3DLulzbotCura.ini
File version from testing of 6/11/17. Overrides extruder steps to 100/mm Turns heat off upon ending. Are absolute coordinates necessary? The Z offset from extruder is in question here. Here it is commented out.
start.gcode = M92 E100 ; Extruder steps per mm set to 100 M203 Z10 ; override max Z feedrate from 5 to 10 mm/s G28 X0 Y0 Z0 ; home G29 ; autolevel G90 ; set absolute coordinates ;M851 Z-2 ; Set the Z probe offset to -2 end.gcode = G28 X0 Y0 ;move X/Y to min endstops M84 ;steppers off M104 S0 ; make sure the extuder is turned off. M140 S0 ; make sure the bed is turned off.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Dimensions | User | Comment | |
|---|---|---|---|---|
| current | 18:20, 16 June 2017 | (10 KB) | Marcin (talk | contribs) | File version from testing of 6/11/17. Overrides extruder steps to 100/mm Turns heat off upon ending. Are absolute coordinates necessary? The Z offset from extruder is in question here. Here it is commented out. start.gcode = M92 E100 ; Extruder... |
- You cannot overwrite this file.
File usage
The following page links to this file:
