LifeTrac IV/Manufacturing Instructions/Arms

From Open Source Ecology
Jump to: navigation, search

3x6 100inches long

cut in two at 52.5 degrees

Lt4armupper.png

Lt4armlower.png

Gusset

  • Four 3/8"x10" pieces, 16" long (Loader arm bend gussets - instead of triangular shape)

Lt4guesset.png


Hydraulic Mounts

4x Adapter plate (size 0.5 x4x11 each) 4x New loader plate (size 0.5 x3x3 each) 2x New piston mounts - note you will have to mirror the drawing for the other side (made of 0.5 x5x5 x 5length angle and 0.5 x4x3 x4length angle) 2x thick gusset plates (look at the drawing and determine best way to order material for this) 2x thin gusset plates

Retrieved from "https://wiki.opensourceecology.org/index.php?title=LifeTrac_IV/Manufacturing_Instructions/Arms&oldid=57431"