LifeTrac IV/Manufacturing Instructions/Wheel Mount

• [1] 1-7/8" shaft - 28" long
• [1] front plate - 1/2"x8"x14" flat
• [1] mid plate - 1/2"x8"x9.5" flat
• [1] back plate - 1/2"x8"x9.5" flat
• [1] top horizontal plate - 1/2"x8"x15.5" flat
• [1] bottom horizontal plate - 1/2"x8"x21" flat
• [1] bottom reinforcement plate - 1/2"x2"x21" flat
• [1] side reinforcement plate - 1/2"x4"x21" flat
• [1] DOM (1/4" wall) - 1"x1-1/2" - 4" long
• [1] DOM (1/4" wall) - 1-7/8"x2-3/8" - 4" long
• [1] Cam handle weld plate - 1/2"x2"x4" flat
• [1] Cam handle 1" rebar - 6" long
• [1] Cam handle 1" rebar - 12" long