Metal Selective Layer Sintering
- Pessimist's view - [1]
- A Desktop/Benchtop Metal SLS Printer for ~$10,000 Formlabs Fuse 1
- Metal is feasible - [2]
- Matterfab. Out of business? - [3]
Open Source Forum for Metal 3D Printing
- Metal SLS - [4]
Literature
- Good PhD thesis, 2003, explaining details of process - [5]. Fig. 1.16 shows that a minimum of 40W is required for perfect prints. P. 40 shows that shielding gas (argon) is sufficient and vaccuum is not necessary.
Patents
- 2004 - [6]
