Mostly 3D Printed Wood Lathe

From Open Source Ecology
Jump to: navigation, search

Basics

Existing OS/DIY Designs

Chris Borge

Video Documentation

Files

BOM

  • Version 3 has a BOM which should be roughly similar, it goes as follows:
    • "6mm rod, for tool rest, ~28cm
    • 5/32nd rod, for slide, 2-3, 27cm
    • Headstock:
      • er11 collet chuck, 5mm bore.
      • 5mm rod, to mount collet chuck. ~10cm
      • 4 10mm OD bearings, 5mm ID.
      • 4 10cm lengths 3/16th threaded rod + 8 nuts
      • 1m220mm bolt, or 2mm rod + glue
    • Tailstock:
      • 2*10mm OD bearings, I use 6mm ID but you could use 5mm if thats easier
      • 3mm thick aluminium plates, 3.
      • 5mm *50mm bolts, 4, + 4 nuts"
  • I'll need to double check all that
    • They also used an old sewing machine motor and belt to drive the system, modifying it to run on a BLDC Servo (Unless the torque would be too low on that, although belt reduction could fix this etc, that or use a stepper motor), so this also needs to be factored into the BOM
  • My area recently got an Ace Hardware which has an organized isle dedicated to Fasteners, and they have threaded rod, angle iron, and maybe even ground rod (i'll have to check the photos i took and online)
    • All in all it should be cheaper and/or faster, so projects like this are way more realizable now so that's neat

Internal Links

External Links