Uploads by Colten Jackson
Jump to navigation
Jump to search
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | Description | Versions |
|---|---|---|---|---|---|
| 22:56, 21 April 2014 | MachineSettings.png (file) |  |
79 KB | 1 | |
| 22:55, 21 April 2014 | BasicSettings.png (file) |  |
41 KB | 1 | |
| 22:51, 21 April 2014 | AdvancedSettings.png (file) |  |
34 KB | 1 | |
| 16:38, 20 April 2014 | AO101TestPrint.gcode (file) |  |
613 KB | This is the gcode that can be loaded into pronterface to test the AO101 (little lulz) downloaded from https://www.lulzbot.com/support/downloads on 4/19/14 | 1 |
| 16:30, 20 April 2014 | NewKaptonLulz.jpg (file) |  |
263 KB | 1 | |
| 16:25, 20 April 2014 | Hydra New spool.jpg (file) |  |
301 KB | 1 | |
| 16:24, 20 April 2014 | Hydra Spool Adjust.jpg (file) |  |
265 KB | 1 | |
| 16:23, 20 April 2014 | TAZ Spool Adjust2.jpg (file) |  |
253 KB | 1 | |
| 16:23, 20 April 2014 | TAZ Spool Adjustment.jpeg (file) |  |
248 KB | 1 | |
| 23:42, 13 March 2014 | Curabucket.png (file) |  |
85 KB | 1 | |
| 21:40, 13 March 2014 | Cura TAZ ABS 35.ini (file) | |
4 KB | Medium speed configuration file for ABS plastic with a .35 mm nozzle on a LulzBot Taz - slice files with Cura! | 1 |
| 19:57, 13 March 2014 | Printablebucketthickenedwalls fixed.stl (file) | |
554 KB | A model of the soil mixer's bucket, altered in Blender and fixed in NetFabb | 1 |
| 19:54, 13 March 2014 | BenSoilMixeruntitled.stl (file) | |
874 KB | The STL exported by Sketchup using the CAM Files Protocol | 1 |
| 19:51, 13 March 2014 | BenSoilMixer.skp (file) | |
2.21 MB | The Sketchup of the Soil Mixer Bucket Ben developed in SketchUp, updated March 13th. | 1 |
| 16:27, 13 March 2014 | Singletine6mm.stl (file) | |
41 KB | 3D model ready to print (needs to be sliced, printed with supports) of Soil Mixer's tines | 1 |
| 07:46, 13 March 2014 | 3DOSE.jpg (file) |  |
2.62 MB | 1 | |
| 07:40, 13 March 2014 | Crackedplaster4.jpg (file) |  |
2.44 MB | 1 | |
| 07:28, 13 March 2014 | Crackedplaster3.jpg (file) |  |
2.41 MB | 1 | |
| 07:22, 13 March 2014 | Crackedplaster2.jpg (file) |  |
2.37 MB | 1 | |
| 07:15, 13 March 2014 | Crackedplaster1.jpg (file) |  |
2.44 MB | microcracks on east wall of hablab after plastering job gone awry. | 1 |
| 06:44, 13 March 2014 | 3D Print of Tines.jpeg (file) |  |
1,003 KB | Printed some model tines for the Soil Mixer / Pulverizer. | 1 |
| 02:53, 13 March 2014 | Microhousesynth.jpg (file) |  |
80 KB | Just a little photosynth panorama on 11 March 2014. | 1 |
| 02:45, 13 March 2014 | Coltenprinting.jpg (file) |  |
175 KB | Just a good candid shot, working at the Printer desk in the HabLab, 12 March 2014. | 1 |
| 02:36, 13 March 2014 | UltimakerPrinting.jpg (file) |  |
2.66 MB | March 11th photo of the first Ultimaker print after re-assembling. Bed needs to be leveled, but was otherwise running smoothly. | 1 |
| 02:20, 13 March 2014 | Hablabsynth.jpg (file) |  |
2.25 MB | A panaroma of the HabLab during whitewashing taken March 11, 2014 Created with Microsoft Photosynth | 1 |
