Mike Hill Modular Wheel Units Order: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
Line 7: Line 7:


=Parts=
=Parts=
<html><img src="https://docs.google.com/drawings/d/18PUHKcYdxRD04jUPwCMHPouO43TE1FLG1mF6PFKtMCw/pub?w=700&amp;h=500"></html>
<html><img src="https://docs.google.com/drawings/d/18PUHKcYdxRD04jUPwCMHPouO43TE1FLG1mF6PFKtMCw/pub?w=900&amp;h=500"></html>


[https://docs.google.com/a/opensourceecology.org/drawings/d/18PUHKcYdxRD04jUPwCMHPouO43TE1FLG1mF6PFKtMCw/edit edit]
[https://docs.google.com/a/opensourceecology.org/drawings/d/18PUHKcYdxRD04jUPwCMHPouO43TE1FLG1mF6PFKtMCw/edit edit]

Revision as of 20:20, 13 August 2013

Introduction

The wheel unit parts prior to the addendum make:

  • one set of 3" shaft wheel units - for trucktor
  • one set of 1-7/8" shaft wheel units - for microtrac or bulldozer
  • One set of gear reduction units - for Bulldozer. Bulldozer uses 1-7/8" drive and 3" gear reduction.
  • 2 idler wheels for Microtrac

Parts

edit

92 parts total - Complete DXFs here - File:Hillparts.zip. Quantities of specific part below:

For geardown from here on, not shown above, see James_Log#Tue_Jun_18.2C_2013) - Geardownview.jpg -

Changes for incorrect hole position

Parts Addendum

File:Hillparts2.zip - parts 18-32. 100 parts more.

Summary

(note: appears there are 4 too many of the 3" hole plates for geardown) Thisorder.jpg

File:Thisorder.dxf

Mikecuts.jpg

Individual Views

Images

  • [4] Part 1 - Wheelpart1dxf.jpg
  • [8] Part 2 - Wheelpart2dxf.jpg
  • [4] Part 3 - Wheelpart3dxf.jpg
  • [8] Part 4 - Wheelpart4dxf.jpg
  • [10] Part 5 - Wheelpart5dxf.jpg
  • [2] Part 6 - Wheelpart6dxf.jpg
  • [10] Part 7 - Wheelpart7dxf.jpg
  • [14] Part 8 - Wheelpart8dxf.jpg
  • [2] Part 9 - Wheelpart9dxf.jpg
  • [10] Part 10 - Wheelpart10dxf.jpg
  • [10] Part 11 - Wheelpart11dxf.jpg
Retrieved from "https://wiki.opensourceecology.org/index.php?title=Mike_Hill_Modular_Wheel_Units_Order&oldid=104254"