Mike Hill Modular Wheel Units Order: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
 
Line 18: Line 18:
*'''[4] Part 1 - [[File:Wheel Mounts Part 1.dxf]] - 6.26 bolt spacing, 11/16 holes. Also 6.0 bolt spacing and 5/8 holes need to be accounted for - so we have added [[File:UR_3inch_universal.dxf]]
*'''[4] Part 1 - [[File:Wheel Mounts Part 1.dxf]] - 6.26 bolt spacing, 11/16 holes. Also 6.0 bolt spacing and 5/8 holes need to be accounted for - so we have added [[File:UR_3inch_universal.dxf]]
*'''[6] Part 2 - [[File:Wheel Mounts Part 2.dxf]]  
*'''[6] Part 2 - [[File:Wheel Mounts Part 2.dxf]]  
*'''[4] Part 3 - [[File:Wheel Mounts Part 3.dxf]]  
*'''[4] Part 3 - [[File:Wheel Mounts Part 3.dxf]]. Modified for 6 an 6.26 inch spacing as above: [[File:3-mwu_3inch_universal.dxf]]
*'''[6] Part 4 - [[File:Wheel Mounts Part 4.dxf]]  
*'''[6] Part 4 - [[File:Wheel Mounts Part 4.dxf]]  
*'''[8] Part 5 - [[File:Wheel Mounts Part 5.dxf]]  
*'''[8] Part 5 - [[File:Wheel Mounts Part 5.dxf]]  

Latest revision as of 06:13, 6 November 2013

Introduction

The wheel unit parts prior to the addendum make:

  • one set of 3" shaft wheel units - for trucktor
  • one set of 1-7/8" shaft wheel units - for microtrac or bulldozer
  • One set of gear reduction units - for Bulldozer. Bulldozer uses 1-7/8" drive and 3" gear reduction.
  • 2 idler wheels for Microtrac

Parts

edit

Note: if Motor Interface Plate is not used in the above graphic, Part 5 must be replaced with a Direct Wheel Motor Mounting Plate for the 45.6 Cu In Hydraulic Motor.

92 parts total - Complete DXFs here - File:Hillparts.zip. Quantities of specific part below:

For geardown from here on, not shown above, see James_Log#Tue_Jun_18.2C_2013) - Geardownview.jpg -

Changes for incorrect hole position

Parts Addendum

File:Hillparts2.zip - parts 18-32. 100 parts more.

  • Note: LifeTrac Motor Interface Plate is missing from this set.

Summary

(note: appears there are 4 too many of the 3" hole plates for geardown) Thisorder.jpg

File:Thisorder.dxf

Mikecuts.jpg

Individual Views

Images

  • [4] Part 1 - Wheelpart1dxf.jpg
  • [8] Part 2 - Wheelpart2dxf.jpg
  • [4] Part 3 - Wheelpart3dxf.jpg
  • [8] Part 4 - Wheelpart4dxf.jpg
  • [10] Part 5 - Wheelpart5dxf.jpg
  • [2] Part 6 - Wheelpart6dxf.jpg
  • [10] Part 7 - Wheelpart7dxf.jpg
  • [14] Part 8 - Wheelpart8dxf.jpg
  • [2] Part 9 - Wheelpart9dxf.jpg
  • [10] Part 10 - Wheelpart10dxf.jpg
  • [10] Part 11 - Wheelpart11dxf.jpg