Mike Hill Modular Wheel Units Order: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
No edit summary
 
(27 intermediate revisions by the same user not shown)
Line 1: Line 1:
=Introduction=
=Introduction=
These parts make:
The wheel unit parts prior to the addendum make:
*one set of 3" shaft wheel units - for trucktor
*one set of 3" shaft wheel units - for trucktor
*one set of 1-7/8" shaft wheel units - for microtrac or bulldozer
*one set of 1-7/8" shaft wheel units - for microtrac or bulldozer
Line 7: Line 7:


=Parts=
=Parts=
<html><img src="https://docs.google.com/drawings/d/1V4tsbDBDGmTd_PJf5MTH9ptnxeMgqMD15aS5zBzw2VA/pub?w=700&amp;h=500"></html>
<html><img src="https://docs.google.com/drawings/d/18PUHKcYdxRD04jUPwCMHPouO43TE1FLG1mF6PFKtMCw/pub?w=900&amp;h=500"></html>


[https://docs.google.com/drawings/d/1V4tsbDBDGmTd_PJf5MTH9ptnxeMgqMD15aS5zBzw2VA/edit edit]
[https://docs.google.com/a/opensourceecology.org/drawings/d/18PUHKcYdxRD04jUPwCMHPouO43TE1FLG1mF6PFKtMCw/edit edit]


<span style="color:red"> Note: if Motor Interface Plate is '''not''' used in the above graphic, Part 5 must be replaced with a [[Direct Wheel Motor Mounting Plate]] for the [[45.6 Cu In Hydraulic Motor]].
</span>
'''92 parts total - Complete DXFs here - [[File:hillparts.zip]]'''. Quantities of specific part below:
'''92 parts total - Complete DXFs here - [[File:hillparts.zip]]'''. Quantities of specific part below:


*'''[4] Part 1 - [[File:Wheel Mounts Part 1.dxf]]  
*'''[4] Part 1 - [[File:Wheel Mounts Part 1.dxf]] - 6.26 bolt spacing, 11/16 holes. Also 6.0 bolt spacing and 5/8 holes need to be accounted for - so we have added [[File:UR_3inch_universal.dxf]]
*'''[6] Part 2 - [[File:Wheel Mounts Part 2.dxf]]  
*'''[6] Part 2 - [[File:Wheel Mounts Part 2.dxf]]  
*'''[4] Part 3 - [[File:Wheel Mounts Part 3.dxf]]  
*'''[4] Part 3 - [[File:Wheel Mounts Part 3.dxf]]. Modified for 6 an 6.26 inch spacing as above: [[File:3-mwu_3inch_universal.dxf]]
*'''[6] Part 4 - [[File:Wheel Mounts Part 4.dxf]]  
*'''[6] Part 4 - [[File:Wheel Mounts Part 4.dxf]]  
*'''[8] Part 5 - [[File:Wheel Mounts Part 5.dxf]]  
*'''[8] Part 5 - [[File:Wheel Mounts Part 5.dxf]]  
Line 31: Line 34:
*[4] Part 16 - [[File:Wheel Mounts Part 16.dxf]]
*[4] Part 16 - [[File:Wheel Mounts Part 16.dxf]]
*[4] Part 17 - [[File:Wheel Mounts Part 17.dxf]]
*[4] Part 17 - [[File:Wheel Mounts Part 17.dxf]]
Changes for incorrect hole position
*[4] Part 8  New - [[File:Wheel Mounts Part 8 new.dxf]]
*[4] Part 11 New - [[File:Wheel Mounts Part 11 new.dxf]]


==Parts Addendum==
==Parts Addendum==
'''[[ File:Hillparts2.zip]] - parts 18-32. 100 parts more.'''
*[4] Part 18 - Sprocket - [[File:45T325bore1by8cut.dxf]] - [[Image:sprocketwhubcut.jpg|80px]]
*[4] Part 18 - Sprocket - [[File:45T325bore1by8cut.dxf]] - [[Image:sprocketwhubcut.jpg|80px]]
*[8] Part 19 - Hub Plate - [[File:3hubplate.dxf]] - [[Image:3hubplate.jpg|80px]]
*[8] Part 19 - Hub Plate - [[File:3hubplate.dxf]] - [[Image:3hubplate.jpg|80px]]
*[4] Part 20 - Microtrac Hub - [[File:Wheel Hub for MicroTrac.dxf]] - [[File:MicroTrac hub bracket DXF Snip.PNG|80px]]
*[4] Part 20 - Microtrac Hub - [[File:Wheel Hub for MicroTrac.dxf]] - [[File:MicroTrac hub bracket DXF Snip.PNG|80px]]
*[4] Part 21 - Trucktor Motor Interface Plate - [[File:trucktorinterface.dxf]] - [[File:trucktorinterface.jpg|80px]]
*[4] Part 21 - Trucktor Motor Interface Plate - [[File:trucktorinterface.dxf]] - [[File:trucktorinterface.jpg|80px]]
:*Note: LifeTrac Motor Interface Plate is missing from this set.
*[8] Part 22 - Bobcat Standard Quick Attach Standard - [[File:Bobcatstandard.dxf]] - [[Image:bobcatstandard.jpg|100px]]
*[8] Part 22 - Bobcat Standard Quick Attach Standard - [[File:Bobcatstandard.dxf]] - [[Image:bobcatstandard.jpg|100px]]
*[7] Part 23 - Dozer Rib 1 - [[File:drib1.dxf]] - [[Image:drib1.jpg|100px]]
*[7] Part 23 - Dozer Rib 1 - [[File:drib1.dxf]] - [[Image:drib1.jpg|100px]]
Line 42: Line 52:
*[4] Part 25 - Pivot Holder 1 - [[File:holder1.dxf]] - [[Image:holder1.jpg|100px]]
*[4] Part 25 - Pivot Holder 1 - [[File:holder1.dxf]] - [[Image:holder1.jpg|100px]]
*[4] Part 26 - Pivot Holder 2 - [[File:holder2.dxf]] - [[Image:holder2.jpg|100px]]
*[4] Part 26 - Pivot Holder 2 - [[File:holder2.dxf]] - [[Image:holder2.jpg|100px]]
*[2] Part 27 - Pivot - [[File:Pivot.dxf]] - [[Image:pivot.jpg|100px]]
*[2] Part 27 - Pivot - [[File:dpivot.dxf]] - [[Image:dpivot.jpg|100px]]
 
*[4] Part 28 - Spacer - [[File:pspacer.dxf]] - [[Image:pspacer.jpg|100px]]
 
*[4] Part 29 - Ear - [[File:pear.dxf]] - [[Image:pear.jpg|100px]]
[[Image:DozerBladeandribDFX.PNG|x300px|June 18, 2013]]
*[8] Part 30 - Ironworker Blade Holder - [[File:bladeholder.dxf]] - [[Image:bladeholder.jpg|100px]]
[[Image:DozerPivotDFX2.PNG|300px|June 18, 2013]]
*[16] Part 31 - Small Bonding Plate - [[File:stocksmallbond.dxf]] - [[Image:stocksmallbond.jpg|100px]]
 
*[16] Part 32 - Medium Bonding Plate - [[File:stockmedbond.dxf]] - [[Image:stockmedbond.jpg|100px]]
[[File:Dblade and ribs.dxf]]
 
[[File:Dozerpivot3.dxf]]
 
[[File:DozerMount.dxf]]


=Summary=
=Summary=

Latest revision as of 06:13, 6 November 2013

Introduction

The wheel unit parts prior to the addendum make:

  • one set of 3" shaft wheel units - for trucktor
  • one set of 1-7/8" shaft wheel units - for microtrac or bulldozer
  • One set of gear reduction units - for Bulldozer. Bulldozer uses 1-7/8" drive and 3" gear reduction.
  • 2 idler wheels for Microtrac

Parts

edit

Note: if Motor Interface Plate is not used in the above graphic, Part 5 must be replaced with a Direct Wheel Motor Mounting Plate for the 45.6 Cu In Hydraulic Motor.

92 parts total - Complete DXFs here - File:Hillparts.zip. Quantities of specific part below:

For geardown from here on, not shown above, see James_Log#Tue_Jun_18.2C_2013) - Geardownview.jpg -

Changes for incorrect hole position

Parts Addendum

File:Hillparts2.zip - parts 18-32. 100 parts more.

  • Note: LifeTrac Motor Interface Plate is missing from this set.

Summary

(note: appears there are 4 too many of the 3" hole plates for geardown) Thisorder.jpg

File:Thisorder.dxf

Mikecuts.jpg

Individual Views

Images

  • [4] Part 1 - Wheelpart1dxf.jpg
  • [8] Part 2 - Wheelpart2dxf.jpg
  • [4] Part 3 - Wheelpart3dxf.jpg
  • [8] Part 4 - Wheelpart4dxf.jpg
  • [10] Part 5 - Wheelpart5dxf.jpg
  • [2] Part 6 - Wheelpart6dxf.jpg
  • [10] Part 7 - Wheelpart7dxf.jpg
  • [14] Part 8 - Wheelpart8dxf.jpg
  • [2] Part 9 - Wheelpart9dxf.jpg
  • [10] Part 10 - Wheelpart10dxf.jpg
  • [10] Part 11 - Wheelpart11dxf.jpg
Retrieved from "https://wiki.opensourceecology.org/index.php?title=Mike_Hill_Modular_Wheel_Units_Order&oldid=110868"