Talk:Universal CNC Axis: Difference between revisions
Jump to navigation
Jump to search
| (6 intermediate revisions by the same user not shown) | |||
| Line 8: | Line 8: | ||
*Frame Axis Mount | *Frame Axis Mount | ||
**Carriage and smooth Rods may bump into the frame's flange mounting bolts | **Carriage and smooth Rods may bump into the frame's flange mounting bolts | ||
**could mount motor and idler side flush to frame if carriage was slightly skinnier and no obstructions from the frame brackets | |||
***mighht be able to reduce part count, could move nut and washer outside of frame to tighten motor and idler pieces | |||
*Attaching Motor and Idler Side to Carriage of another axis | |||
**Need proper length machine screw with allen wrench head | |||
**https://www.mcmaster.com/#91292a139/=14su0or M6x30 Socket Head | |||
*Attaching Motor and Idler Side to Frame | |||
**Have to use a washer and nut external to the Printed Piece | |||
**Could replace hex head bolt with a Socket Head Bolt | |||
***would be able to tighten with a nut on other side, then mount to frame wall with more nuts | |||
***Problem: hard to find fully threaded bolts over 30mm in length | |||
****first nut is within the first 18mm of the bolt | |||
**If using a washer, make sure its OD is larger than standard size, will fall into hex hole | |||
***https://www.mcmaster.com/#91116a150/=14su8qc M6 18mm OD washer | |||
Latest revision as of 03:32, 29 October 2016
Future Design Changes
- Frame Flanges
- Change frame flage bolts from phillips head to hex heads
- screwdriver isnt ideal
- Frame bolts probably need washers
- Design currently has #8 size bolts, a little loose inside of the holes. 7/32? use metric?
- Change frame flage bolts from phillips head to hex heads
- Frame Axis Mount
- Carriage and smooth Rods may bump into the frame's flange mounting bolts
- could mount motor and idler side flush to frame if carriage was slightly skinnier and no obstructions from the frame brackets
- mighht be able to reduce part count, could move nut and washer outside of frame to tighten motor and idler pieces
- Attaching Motor and Idler Side to Carriage of another axis
- Need proper length machine screw with allen wrench head
- https://www.mcmaster.com/#91292a139/=14su0or M6x30 Socket Head
- Attaching Motor and Idler Side to Frame
- Have to use a washer and nut external to the Printed Piece
- Could replace hex head bolt with a Socket Head Bolt
- would be able to tighten with a nut on other side, then mount to frame wall with more nuts
- Problem: hard to find fully threaded bolts over 30mm in length
- first nut is within the first 18mm of the bolt
- If using a washer, make sure its OD is larger than standard size, will fall into hex hole
- https://www.mcmaster.com/#91116a150/=14su8qc M6 18mm OD washer