D3D Extruder: Difference between revisions
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
=CAD File Downloads= | =CAD File Downloads= | ||
'''Simple Extruder Holder''' | '''Simple Extruder Holder''' | ||
[[File:extruderholder.png]] | |||
*FreeCAD -[[File:motor interface.fcstd]]. I used M4 nuts for the nut catcher, but for the screws I used added the https://www.mcmaster.com/#90116a217/=14gcc4s that are already in the universal axis, in order to avoid adding a new item to the BOM | *FreeCAD -[[File:motor interface.fcstd]]. I used M4 nuts for the nut catcher, but for the screws I used added the https://www.mcmaster.com/#90116a217/=14gcc4s that are already in the universal axis, in order to avoid adding a new item to the BOM | ||
Revision as of 04:43, 2 March 2017
CAD File Downloads
Simple Extruder Holder
- FreeCAD -File:Motor interface.fcstd. I used M4 nuts for the nut catcher, but for the screws I used added the https://www.mcmaster.com/#90116a217/=14gcc4s that are already in the universal axis, in order to avoid adding a new item to the BOM
- STL - File:Motor interface.stl
BOM
- Use this extruder - [1]
Exploded Part Diagram
Part Files
3D Printed
- Extruder Idler - File:Idler.stl - File:Idler.fcstd
- Extruder carriage side - File:Carriage side.stl - File:Carriage side.fcstd
- Extruder motor side - File:Motor size.stl File:Motor side.fcstd
Other Parts
- Stepped motor - File:Nema17.stl - File:Nema17.fcstd
- Pulley - File:Pulley.fcstd - File:Pulley.stl
- 8mm bearing - File:8mm bearing.stl - File:8mm bearing.fcstd
- E3D V6 - File:E3Dv6.stl - File:E3Dv6.fcstd
Fasteners
Tech Tree of Choices
We go from Tech tree of choices -> Industry Standards -> Technology Assessment -> Value Proposition
- These are all the different ways to implement an extruder for a 3D printer.
- Hit Ctrl-mouse scroll to zoom in