Frame Construction Set: Difference between revisions
Jump to navigation
Jump to search
| Line 33: | Line 33: | ||
==Online Viewer== | ==Online Viewer== | ||
<html><iframe src="//sharecad.org/cadframe/load?url=http:// | <html><iframe src="//sharecad.org/cadframe/load?url=http://opensourceecology.org/wiki/File:D3dframe.dxf" scrolling="no" height=600 width=900></iframe></html> | ||
=Cost Estimates for Other Locations= | =Cost Estimates for Other Locations= | ||
Revision as of 17:46, 14 March 2017
CNC Cut File
Cut Request Template
(can use oxyfuel, plasma, laser, or waterjet)
Hello,
Please provide a quote and turnaround time for CNC cutting for the attached file, cut from 4'x8' sheet, 11 gauge.
I need 6 of those nested sets (as shown in the file), which take a total of 32" of a 96" long sheet. I have more notes on this cut job at D3D Frame (below).
Thanks, Marcin
Download
- Download Layout on a 4'x8' sheet of steel: File:D3dframe layout.dxf
- Download Single nested frame piece: File:D3dframe.dxf
Notes:
- Frame pieces are square:
- 16" for outer square, 2" edge width
- 12" for outer square, 2" edge width
- 8" for outer square, 1.5" edge width
- Save the inner square. It will be used for mounting plates.
- if sheet is not exaclty 4'x8', an edge must be drawn around the frame so that every outer nested piece is exactly 16" on the side.
- 3 nested pieces can make 3 frames (each frame is made of 6 pieces
Online Viewer
Cost Estimates for Other Locations
- Chile-
- Maine -
- Texas -
- USA Missouri - Seaman and Schuske, St. Joseph Missouri - job cost $150 for cutting of the nested set above.
Development Document
Development Discussion
Social Media
Links
- Critical Path for D3D 2016 - edit