File:D3dframe layout.dxf

From Open Source Ecology
Jump to: navigation, search
D3dframe_layout.dxf(file size: 91 KB, MIME type: text/plain)
Warning: This file type may contain malicious code. By executing it, your system may be compromised.


HintLightbulb.png Hint: Recommended metal gauges is 11 gauge or 1/8", though 10 and 12 gauge will work as well. The frame file below uses a 4'x8' sheet of steel for cutting. If we use a 5'x10' sheet of steel - then we can get 20", 18", 16", 14", 12", and 10" frames with respectively smaller possible print area. Thus, each 5x10 sheet gets you 18 frame sets, minimizing material waste.

Version History

  • the April 4, 2017 version is 4-nested. Optimizing material use over the original
  • 20 February 2017 version is 3-nested

Notes

  • November 9, 2018 cutting quote is $297 + $40 delivery from Seaman and Schuske.

File history

Click on a date/time to view the file as it appeared at that time.

(newest | oldest) View (newer 10 | ) (10 | 20 | 50 | 100 | 250 | 500)
Date/TimeDimensionsUserComment
current18:53, 14 November 2018 (91 KB)Marcin (talk | contribs)removed double lines
18:52, 14 November 2018 (91 KB)Marcin (talk | contribs)
16:24, 13 November 2018 (93 KB)Marcin (talk | contribs)9 frame sets on a 4x8 foot sheet of mild steel. Gauge 12 preferred, but gauge 11 works as well.
00:18, 10 November 2018 (93 KB)Marcin (talk | contribs)18 frames (3 sets of frames) for cutting out of a 4'x8' sheet of steel
00:15, 10 November 2018 (49 KB)Marcin (talk | contribs)6 frames with all holes
23:47, 9 November 2018 (49 KB)Marcin (talk | contribs)
23:21, 9 November 2018 (37 KB)Marcin (talk | contribs)3 frames
23:06, 9 November 2018 (30 KB)Marcin (talk | contribs)Single set of frames, not finished.
17:16, 3 August 2018 (53 KB)Marcin (talk | contribs)Added holes for mounting y and z axes.
16:49, 3 August 2018 (38 KB)Marcin (talk | contribs)One whole 4x8 foot sheet with 16", 14", 12", 10", 8" nested for up to 5 usable frame sets.
(newest | oldest) View (newer 10 | ) (10 | 20 | 50 | 100 | 250 | 500)
  • You cannot overwrite this file.

The following 2 pages link to this file: