File:D3D frame assembly guide.fcstd: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
=Notes= | |||
*Initial upload has .2" width. | |||
*Proper dimensions should be done based on US Steel gauge + Metric steel gauge | |||
*Design should allow for accuracy | |||
*Make gap 1/2 mm oversized (0.05") | |||
*Gap should fit several frame gauges: 14, 12, 11, 10, | |||
*Make it such that the gap is stepped in the piece so that the same piece can be used for all frame sizes | |||
*[[Steel Gauge]] - | |||
Revision as of 14:20, 22 March 2017
Notes
- Initial upload has .2" width.
- Proper dimensions should be done based on US Steel gauge + Metric steel gauge
- Design should allow for accuracy
- Make gap 1/2 mm oversized (0.05")
- Gap should fit several frame gauges: 14, 12, 11, 10,
- Make it such that the gap is stepped in the piece so that the same piece can be used for all frame sizes
- Steel Gauge -
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Dimensions | User | Comment | |
|---|---|---|---|---|
| current | 03:18, 23 March 2017 | (35 KB) | Polemidis (talk | contribs) | steps for different gauges cut corner |
| 12:53, 21 March 2017 | (15 KB) | Polemidis (talk | contribs) |
You cannot overwrite this file.
File usage
The following page uses this file: