Revision as of 20:17, 4 April 2017

Version History

the April 4, 2017 version is 4-nested. Optimizing material use over the original
20 February 2017 version is 3-nested

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Dimensions	User	Comment
current	18:53, 14 November 2018	(91 KB)	Marcin (talk \| contribs)	removed double lines
	18:52, 14 November 2018	(91 KB)	Marcin (talk \| contribs)
	16:24, 13 November 2018	(93 KB)	Marcin (talk \| contribs)	9 frame sets on a 4x8 foot sheet of mild steel. Gauge 12 preferred, but gauge 11 works as well.
	00:18, 10 November 2018	(93 KB)	Marcin (talk \| contribs)	18 frames (3 sets of frames) for cutting out of a 4'x8' sheet of steel
	00:15, 10 November 2018	(49 KB)	Marcin (talk \| contribs)	6 frames with all holes
	23:47, 9 November 2018	(49 KB)	Marcin (talk \| contribs)
	23:21, 9 November 2018	(37 KB)	Marcin (talk \| contribs)	3 frames
	23:06, 9 November 2018	(30 KB)	Marcin (talk \| contribs)	Single set of frames, not finished.
	17:16, 3 August 2018	(53 KB)	Marcin (talk \| contribs)	Added holes for mounting y and z axes.
	16:49, 3 August 2018	(38 KB)	Marcin (talk \| contribs)	One whole 4x8 foot sheet with 16", 14", 12", 10", 8" nested for up to 5 usable frame sets.

You cannot overwrite this file.

The following 2 pages use this file:

@@ Line 1: / Line 1: @@
 =Version History=
-*the April 4, 2017 version is 4-nested. Original is 3-nested
+*the April 4, 2017 version is 4-nested. Optimizing material use over the original
+*20 February 2017 version is 3-nested