CEB CAD Assembly Constrained: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
No edit summary
Line 5: Line 5:


This is the current [[File:CEB 17.08 CAD Assembly.fcstd]] .  DO NOT USE IT until it is ready and double checked.
This is the current [[File:CEB 17.08 CAD Assembly.fcstd]] .  DO NOT USE IT until it is ready and double checked.
This [[File:CEB 17.08_supporting_files.zip]] contains all the Subassemblies, Subsubassemblies( they should be renamed to "modules") and all the individual parts that are used in the above assembly.
I will upload later the Sub Assemblies, and the Subsubassemblies, as all the individual parts   
I will upload later the Sub Assemblies, and the Subsubassemblies, as all the individual parts   
==Errors/Mismatches in CAD==
==Errors/Mismatches in CAD==

Revision as of 13:26, 24 July 2017

I am making a fully constrained CAD of the CEB Press. The current File:CEBPressJuneGroup.fcstd is unconstrained and have many inaccuracies. This page will list all the problems I am founding as I continue the process of constraining the CAD.

  • Plz advise on how to resolve each issue, and remove every corrected one from the list

This is the current File:CEB 17.08 CAD Assembly.fcstd . DO NOT USE IT until it is ready and double checked. This File:CEB 17.08 supporting files.zip contains all the Subassemblies, Subsubassemblies( they should be renamed to "modules") and all the individual parts that are used in the above assembly. I will upload later the Sub Assemblies, and the Subsubassemblies, as all the individual parts

Errors/Mismatches in CAD

ZcyL-DcRMP8

video 1 - the plate needs to be moodified so it matches the bar. See design sprint working doc for who was assigned to that task and see if they finished.

video 2 - the hole in the frame plate needs to be moved over so it matches the arm.

Video 3 - it's ok