Open Source Continuous Charcoal Production Device: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
{{Hint|Please format with asterisks and use top level headings as below. Eric - can you email me at marcin@opensourceecology.org so we can coordinate?}} | |||
=Basics= | |||
*Part of the [[Open Source Fuels Construction Set]]. | |||
*Something like [https://youtu.be/qxWiRCzGBRY this] essentially: | |||
*May be slightly more refined though | |||
*Use the [[D3D Ceramic Printer]] instead of metal barrels to increase core temperature, as well as prevent degredation due to rust. | |||
*Add automation to the auger via a control circuit, a servo motor, and some sort of sensor | |||
*Add temperature probes for checking everything is going smoothly + troubleshooting issues | |||
*Add a feedstock auger system | |||
Revision as of 01:59, 2 January 2018
Hint: Please format with asterisks and use top level headings as below. Eric - can you email me at marcin@opensourceecology.org so we can coordinate?
Basics
- Part of the Open Source Fuels Construction Set.
- Something like this essentially:
- May be slightly more refined though
- Use the D3D Ceramic Printer instead of metal barrels to increase core temperature, as well as prevent degredation due to rust.
- Add automation to the auger via a control circuit, a servo motor, and some sort of sensor
- Add temperature probes for checking everything is going smoothly + troubleshooting issues
- Add a feedstock auger system