Revision as of 08:05, 8 January 2018

Basics

- A D3D Printer modified to print metal parts

- Required a heavily heated build chamber and nozzle

- This page has some good information.

- Uses metal wire as filament

- Allows for very complex metal parts that would be hard to produce by subtractive manufacturing methods

-

-

- Uses wire as feedstock (almost like plastic 3d printer filament)

- Precise

- Requires little post processing

-

-

-

@@ Line 1: / Line 1: @@
-==Basics==
+=Basics=
 - Part of the [[Open Source Digital Fabrication Construction Set]]
@@ Line 5: / Line 5: @@
 - A [[D3D|D3D Printer]] modified to print metal parts
-- Allows for very complex metal parts that would be hard to produce by subtractive methods
 - Required a heavily heated build chamber and nozzle
@@ Line 12: / Line 12: @@
 - Uses metal wire as filament
+=Used For=
+- Allows for very complex metal parts that would be hard to produce by subtractive manufacturing methods
+=Industry Standards=
+-
+=Existing Open Source Designs=
+-
+=Minimum Viable Product=
+- Uses wire as feedstock (almost like plastic 3d printer filament)
+- Precise
+- Requires little post processing
+=Basic Design=
+-
+=BOM=
+-
+=See Also=
+- [[Open Source Metal SLS 3D Printer]]
+- [[Small Aluminum Part Machine]]
+- [[Open Source 3 Axis Wire-Cut EDM Machiene]]
+- [[Open Source Robotic Arm Wire Cut EDM Machiene]]
+=Useful Links=
+-