Metal Selective Layer Sintering: Difference between revisions
Jump to navigation
Jump to search
| Line 7: | Line 7: | ||
=Literature= | =Literature= | ||
*Good PhD thesis, 2003, explaining details of process - [http://etheses.whiterose.ac.uk/2631/1/Hauser_C_Mech_Eng_PhD_2003.pdf]. Fig. 1.16 shows that a minimum of 40W is required for perfect prints. | *Good PhD thesis, 2003, explaining details of process - [http://etheses.whiterose.ac.uk/2631/1/Hauser_C_Mech_Eng_PhD_2003.pdf]. Fig. 1.16 shows that a minimum of 40W is required for perfect prints. P. 40 shows that shielding gas (argon) is sufficient and vaccuum is not necessary. | ||
=Patents= | =Patents= | ||
Revision as of 04:17, 16 February 2018
Open Source Forum for Metal 3D Printing
- Metal SLS - [4]
Literature
- Good PhD thesis, 2003, explaining details of process - [5]. Fig. 1.16 shows that a minimum of 40W is required for perfect prints. P. 40 shows that shielding gas (argon) is sufficient and vaccuum is not necessary.
Patents
- 2004 - [6]