Revision as of 02:18, 13 July 2018

Old Version for 4 mm Sensor

Mounting plate close to body but distinct from carriage is a good idea - for good center of gravity close to X axis
3 Mounting Bolts must be present for the stepper motor
Make it work with 3mm and 1.75mm filament

Version above does not work - sensor holder too high - need to lower it slightly.

File with just body, cover, and sensor holder of extruder - for modification.

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Dimensions	User	Comment
current	05:02, 6 February 2018	(2.26 MB)	Robinmaster18 (talk \| contribs)	Changed to 8mm proximity sensor, added interface plate for magnets. Editable.
	19:25, 11 May 2017	(3.21 MB)	Legocef (talk \| contribs)
	15:37, 3 April 2017	(3.24 MB)	Legocef (talk \| contribs)
	12:10, 1 April 2017	(2.87 MB)	Jose.urra (talk \| contribs)	Test: not working the changes I made in FreeCad
	12:06, 1 April 2017	(2.87 MB)	Jose.urra (talk \| contribs)	Improved Tree Structure based on modules and Assembly logic
	12:03, 1 April 2017	(2.87 MB)	Jose.urra (talk \| contribs)	Improved tree structure based on logic of Assembly
	18:47, 27 March 2017	(2.86 MB)	Legocef (talk \| contribs)	Original file from https://grabcad.com/library/original-prusa-i3-mk2-printer-1
	11:22, 27 March 2017	(9.32 MB)	Legocef (talk \| contribs)
	22:03, 26 March 2017	(2.32 MB)	Legocef (talk \| contribs)

You cannot overwrite this file.

The following 6 pages use this file:

@@ Line 14: / Line 14: @@
 =Notes=
 Version above does not work - sensor holder too high - need to lower it slightly.
+=Modification=
+File with just body, cover, and sensor holder of extruder - for modification.
+[[File:extruder_modification.fcstd]]
 =More Notes=