3D Printer Extruder: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
Line 19: Line 19:
File:5015blower.jpg|[[File:5015blower.fcstd]] '''5015 Blower'''
File:5015blower.jpg|[[File:5015blower.fcstd]] '''5015 Blower'''
File:check.png|[[File:nema17face.fcstd]] Nema 17 Faceplate sketch
File:check.png|[[File:nema17face.fcstd]] Nema 17 Faceplate sketch
File:extrudersensorholder.png|[[File:titanaeromarcin.fcstd]]  Marcin's Titan Aero sensor holder - not finished. Finished STL - [[File:titanaeromarcin.stl]].
File:extrudersensorholder.png|[[File:titanaeromarcin.fcstd]]  Marcin's Titan Aero sensor holder. STL - [[File:titanaeromarcin.stl]].
File:check.png|[[File:fanwithholderpattern.fcstd]] Fan mount for a print cooling fan
File:check.png|[[File:fanwithholderpattern.fcstd]] Fan mount for a print cooling fan
File:titanwithblower.png| Titan Aero with blower. Download in FreeCAD format - [https://github.com/OpenSourceEcology/3D-Printer-Part-Library/blob/master/holder%20%2B%20motor%20%2B%20Titan.fcstd]
File:titanwithblower.png| Titan Aero with blower. Download in FreeCAD format - [https://github.com/OpenSourceEcology/3D-Printer-Part-Library/blob/master/holder%20%2B%20motor%20%2B%20Titan.fcstd]

Revision as of 18:20, 16 November 2018

Working Doc

edit

Print Cooling Fan

Adding a print cooling fan. Use these part libraries


Part Library

Duct - File:Fanduct.fcstd. Duct stl - File:Fanduct.stl

Part Interface Library

  • 5015 fan - [4] - 17.6x12.2 mm opening of fan
  • Sweep in freecad - [5]

Links

  • 8 mm sensor holder - [6]
  • Heater block only - [7]
  • Unmirrored Titan Aero extruder - [8]