Revision as of 02:26, 21 November 2018

Working Doc

edit

Print Cooling Fan

Adding a print cooling fan. Use these part libraries

Part Library

Fan holder for OSE extruder. Strap-on to fan. Download - File:Fanduct.fcstd. STL - File:Fanduct.stl
Fan holder for OSE extruder. Strap-on to fan. Download - File:Fanholder.fcstd. STL - File:Fanholder.stl
Extruder mount carriage. - FreeCAD - File:Extruder mount carriage.fcstd. STL - File:Extruder mount carriage.stl. Note: FreeCAD file - make sure to select addition component so STL is filled in, and not corrupt, when going from FreeCAD to STL. 3D printed parts only - File:3D Printer Extruder.fcstd
8 mm sensor. Download - File:8mmsensor.fcstd
[1] D3D Extruder Holder. File:Motor interface.fcstd , File:Motor interface.stl Issue: when motor gets hot, this gets loose.
File:5015blower.fcstd 5015 Blower
File:Nema17face.fcstd Nema 17 Faceplate sketch
File:Titanaeromarcin.fcstd Marcin's Titan Aero sensor holder. STL - File:Titanaeromarcin.stl.
File:Fanwithholderpattern.fcstd Fan mount for a print cooling fan
Titan Aero with blower. Download in FreeCAD format - [1]
[2] Alleph Objects FreeCAD version of the Titan Aero extruder.See Mirrored_aero_assem.fcstd file. Note this is not what we use, but a mirror image - there are 2 versions of the Titan Aero.
Extruder bottom mount by Polemidis - File:D3D Mini Sub-Assembly Extruder Bottom Mount.fcstd
Extruder bottom mount by Jose Urra - File:X Universal Axis Motor Interface Horizontal Position Motor Bottom Version.FCStd and File:Extruder Holder April 14.FCStd
Extruder bottom holder derivative by Marcin. Download - File:Bottomholder.fcstd
Stock Titan Aero mount. See [3].