Latest revision as of 15:51, 5 May 2019

Notes

After 1 MB size - see https://github.com/OpenSourceEcology/D3D_v19.04/blob/master/heatbed.fcstd
Note that once I started to add the slots as a linear pattern feature, the rendering slowed to impracticality. From the Slotted version, I simplified the file by converting to dumb object to see if it would improve.

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Dimensions	User	Comment
current	15:51, 5 May 2019	(467 KB)	Marcin (talk \| contribs)	Increased height of snapbuckle holders to 12mm
	17:38, 1 May 2019	(466 KB)	Marcin (talk \| contribs)	Reinforced bed mounting holes
	16:47, 30 April 2019	(230 KB)	Marcin (talk \| contribs)	Minimalist heatbed, no sketches
	16:24, 30 April 2019	(847 KB)	Marcin (talk \| contribs)	Minimalist heatbed: many slots
	15:34, 30 April 2019	(790 KB)	Marcin (talk \| contribs)	Simplified file with bottom slots.
	01:50, 30 April 2019	(426 KB)	Marcin (talk \| contribs)	2 sides perforated
	01:41, 30 April 2019	(376 KB)	Marcin (talk \| contribs)	Added perforation on one side.
	23:00, 29 April 2019	(213 KB)	Marcin (talk \| contribs)	Added wire clamp and hole.
	21:59, 29 April 2019	(45 KB)	Marcin (talk \| contribs)	Extruded 3rd and 4th side
	21:42, 29 April 2019	(10 KB)	Marcin (talk \| contribs)	Extruded, sketch fixed but stripped of dimensions. Last file has dimensions.

You cannot overwrite this file.

The following 4 pages use this file:

@@ Line 1: / Line 1: @@
+=Notes=
+*After 1 MB size - see https://github.com/OpenSourceEcology/D3D_v19.04/blob/master/heatbed.fcstd
+*Note that once I started to add the slots as a linear pattern feature, the rendering slowed to impracticality. From the Slotted version, I simplified the file by converting to dumb object to see if it would improve.