File:Heatbed body1904.fcstd: Difference between revisions
Jump to navigation
Jump to search
(Marcin uploaded a new version of File:Heatbed body1904.fcstd) |
(Marcin uploaded a new version of File:Heatbed body1904.fcstd) |
| (One intermediate revision by the same user not shown) | |
(No difference)
| |
Latest revision as of 15:51, 5 May 2019
Notes
- After 1 MB size - see https://github.com/OpenSourceEcology/D3D_v19.04/blob/master/heatbed.fcstd
- Note that once I started to add the slots as a linear pattern feature, the rendering slowed to impracticality. From the Slotted version, I simplified the file by converting to dumb object to see if it would improve.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Dimensions | User | Comment | |
|---|---|---|---|---|
| current | 15:51, 5 May 2019 | (467 KB) | Marcin (talk | contribs) | Increased height of snapbuckle holders to 12mm |
| 17:38, 1 May 2019 | (466 KB) | Marcin (talk | contribs) | Reinforced bed mounting holes | |
| 16:47, 30 April 2019 | (230 KB) | Marcin (talk | contribs) | Minimalist heatbed, no sketches | |
| 16:24, 30 April 2019 | (847 KB) | Marcin (talk | contribs) | Minimalist heatbed: many slots | |
| 15:34, 30 April 2019 | (790 KB) | Marcin (talk | contribs) | Simplified file with bottom slots. | |
| 01:50, 30 April 2019 | (426 KB) | Marcin (talk | contribs) | 2 sides perforated | |
| 01:41, 30 April 2019 | (376 KB) | Marcin (talk | contribs) | Added perforation on one side. | |
| 23:00, 29 April 2019 | (213 KB) | Marcin (talk | contribs) | Added wire clamp and hole. | |
| 21:59, 29 April 2019 | (45 KB) | Marcin (talk | contribs) | Extruded 3rd and 4th side | |
| 21:42, 29 April 2019 | (10 KB) | Marcin (talk | contribs) | Extruded, sketch fixed but stripped of dimensions. Last file has dimensions. |
You cannot overwrite this file.
File usage
The following 4 pages use this file: