CEB Press Controller v17.08: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
No edit summary
 
(39 intermediate revisions by 2 users not shown)
Line 1: Line 1:
<html><iframe src="https://www.facebook.com/plugins/post.php?href=https%3A%2F%2Fwww.facebook.com%2Fmarcin.jakubowski.378%2Fposts%2F10216238753178669&width=500" width="500" height="724" style="border:none;overflow:hidden" scrolling="no" frameborder="0" allowTransparency="true" allow="encrypted-media"></iframe><iframe src="https://www.facebook.com/plugins/post.php?href=https%3A%2F%2Fwww.facebook.com%2Fmarcin.jakubowski.378%2Fposts%2F10216238735338223&width=500" width="500" height="724" style="border:none;overflow:hidden" scrolling="no" frameborder="0" allowTransparency="true" allow="encrypted-media"></iframe></html>
=Working Document=
=Working Document=
==October 2017==
=Wiring and Pressing Sequence=
The following diagrams show the electrical and plumbing connections. Note that since October, we switched to a single, 2-valve subplate, as opposed to 2 single subplates. This addresses back pressure issues, as subplates are rated for 2000 PSI back pressure from downstream valves.
The document also shows the full sequence of pressing steps under automatic operation.
<html><iframe src="https://docs.google.com/presentation/d/e/2PACX-1vTizYupL4HSzjPVivhHpbWZJ5XXCtTnlOJ5G8qifOHzMQkjhNUStHOVcfCDpBdiEwP56lmXQYYRgrmW/embed?start=false&loop=false&delayms=3000" frameborder="0" width="480" height="275" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe></html>
[https://docs.google.com/presentation/d/1ITZPT5dSDMs_2q3t-ijj3eC7j1GWCpbe99dprmVASLQ/edit#slide=id.g27b48854a0_0_16 edit]


==August 2017==
<html><iframe src="https://docs.google.com/presentation/d/e/2PACX-1vRCpcLmJoIGu998HugcsdF7BwBQ3nYZCFN62GjH5VztSaM9Cp2MffohXC5eHBR8Ym_C5y9zUxvy9i5j/embed?start=false&loop=false&delayms=3000" frameborder="0" width="480" height="299" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe></html>
<html><iframe src="https://docs.google.com/presentation/d/e/2PACX-1vRCpcLmJoIGu998HugcsdF7BwBQ3nYZCFN62GjH5VztSaM9Cp2MffohXC5eHBR8Ym_C5y9zUxvy9i5j/embed?start=false&loop=false&delayms=3000" frameborder="0" width="480" height="299" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe></html>


Line 7: Line 20:
=Bill of Materials=
=Bill of Materials=


*Stranded Wire
**18 gauge red [https://www.napaonline.com/en/p/BEL785302 napa auto] [https://www.grainger.com/product/SOUTHWIRE-COMPANY-Automotv-Primary-Wire-5LXF6 grainger]
**18 gauge black [https://www.napaonline.com/en/p/BEL785300 napa auto]
**20 gauge red [https://www.napaonline.com/en/p/BEL785102 napa auto]
**20 gauge black [https://www.napaonline.com/en/p/BEL785100 napa auto]
*https://www.pololu.com/product/1905
*https://www.pololu.com/product/1905
**[[0.1"_Housings]]
**[[0.1"_Housings]]
Line 14: Line 32:
**Shield Option [http://www.robotshop.com/en/4-channel-30v-relay-shield-module.html RobotShop]
**Shield Option [http://www.robotshop.com/en/4-channel-30v-relay-shield-module.html RobotShop]
*https://www.adafruit.com/product/1445
*https://www.adafruit.com/product/1445
*Zener Diode
**4.7V [http://www.mouser.com/ProductDetail/Vishay-Semiconductors/BZX85B4V7-TR/ Mouser]
**3V for teensy [http://www.mouser.com/ProductDetail/Vishay-Semiconductors/BZX85B3V0-TR/ Mouser]
*Resistor 10K
*Diode
*on/off switch, 2 connectors [https://www.grainger.com/product/HONEYWELL-Toggle-Switch-24D429 grainger]
*on/off switch, 2 connectors [https://www.grainger.com/product/HONEYWELL-Toggle-Switch-24D429 grainger]
*(3) cable gland [https://www.adafruit.com/product/761 adafruit] [https://www.digikey.com/product-detail/en/harting/73040000032/73040000032-ND/4327177 digikey]
===tools===
*Step bit with 13/16 cut [https://www.grainger.com/product/IRWIN-UNIBIT-Step-Drill-Bit-6A922 Grainger]


=Diagram=
=Diagram=
Line 31: Line 49:
[https://docs.google.com/drawings/d/1i0gTLmjF-w9NpsRBqIdqEgmfzy4V2bsiZrbBWye8nTA/edit drive]
[https://docs.google.com/drawings/d/1i0gTLmjF-w9NpsRBqIdqEgmfzy4V2bsiZrbBWye8nTA/edit drive]


*Zener Diode
**4.7V [http://www.mouser.com/ProductDetail/Vishay-Semiconductors/BZX85B4V7-TR/ Mouser]
**3V for teensy [http://www.mouser.com/ProductDetail/Vishay-Semiconductors/BZX85B3V0-TR/ Mouser]
*Resistor 10K
*Diode


==arduino + relay module + DPDT switches w/ plain wire==
==arduino + relay module + DPDT toggle switches w/ plain wire==


[https://en.wikipedia.org/wiki/Switch#Contact_terminology DPDT Switches] used to operate solenoids and send 5v signal to arduino that solenoid is engaged, or auxilary use.
[https://en.wikipedia.org/wiki/Switch#Contact_terminology DPDT Switches] used to operate solenoids and send 5v signal to arduino that solenoid is engaged, or auxilary use.
Line 39: Line 62:


[https://docs.google.com/drawings/d/1oW8M_2zTL2WhdBVOBDlx8sNVcLj--e0mlWJrJRTb_x8/edit drive]
[https://docs.google.com/drawings/d/1oW8M_2zTL2WhdBVOBDlx8sNVcLj--e0mlWJrJRTb_x8/edit drive]
*(2) 6P DPST toggle switch [https://www.grainger.com/product/HONEYWELL-Toggle-Switch-24D451 grainger]
*(9) one position .1" connector [https://www.pololu.com/product/1900]
*(2) four position .1" connector [https://www.pololu.com/product/1903]
*(1) five position .1" connector [https://www.pololu.com/product/1904]
*(1) six position .1" connector [https://www.pololu.com/product/1905]
*(6) M-F crimped .1" cable [https://www.pololu.com/product/1804] [https://www.pololu.com/product/1801]
*(8) M-M crimped .1" cable [https://www.pololu.com/product/1805] [https://www.pololu.com/product/1802]
==arduino + relay module + DPST push button switches w/ plain wire==
<html><img src="https://docs.google.com/drawings/d/e/2PACX-1vRUvqvDvAY61QjRvhPUho2ukHOKXuG1zZoODeL-kouqcfhitApBiv7Yo17AUbASe5o6X2sXIer0b0US/pub?w=400"></html>
[https://docs.google.com/drawings/d/1nBPBWQwJyAulV2s3gz0WchBQPbiRYkue9duM-aN1QeE/edit gdrive]
*(4) push button 4P DPST switch [https://www.digikey.com/product-detail/en/e-switch/PR14EC1100/EG4700-ND/2116179 digikey] [https://www.waytekwire.com/item/44147/SWITCH-PUSH-BUTTON-BLACK/ waytek]
**13/16" hole
*(22) 0.187 Female Quick Connect Insulated Terminals [http://www.mouser.com/ProductDetail/3M-Electronic-Specialty/MNU18-187DFIK/ Mouser]
**optional 16-14 awg crimp end [https://www.digikey.com/product-detail/en/3m/MNU14-187DFIK/920044-03-ND/31252 digikey]
*(4) PG-7 Cable Glands 0.11" to 0.25" [https://www.grainger.com/product/HUBBELL-WIRING-DEVICE-KELLEMS-Nylon-Cable-Connector-2DPF8 Grainger]
**1/2" hole
*(4) PG-7 Lock Nuts [https://www.grainger.com/product/product/HUBBELL-WIRING-DEVICE-KELLEMS-Cord-Connector-Locknut-2DZH4 Grainger]
==arduino + relay module + DPST push button switches w/ ethernet CAT5 cable==
<html><img src="https://docs.google.com/drawings/d/e/2PACX-1vRgcyRfonqitJa3AcadUsPgkgeXFdltvxtSAjpRvE19AxajOsgre3OxI_hvEtK_4pZaxg179JWfrDBr/pub?w=400"></html>
[https://docs.google.com/drawings/d/1B5zrGmyB86Dt29DhnqJ-4NHvCitcTgJ8wBQmWLSS2OM/edit gdrive]
*https://www.waytekwire.com/item/44116/On-Off-Round-Rocker-Switch/
===Wire Harnesses===
<html>
<img src="https://docs.google.com/drawings/d/e/2PACX-1vSsZ8zJsOIrm7Bg1Ak3mRDQQUa9MHy5ejbCn8RWHBcplP7voUPAFBvWmk8qz_3zgwUZqsly4Z43evSp/pub?w=400">
</html>
[https://docs.google.com/drawings/d/1v7WZmoIhA4edaqiHJaVwvE5JINvBmk3UZ7jVab087eA/edit gdrive]
=Troubleshooting=
https://docs.google.com/presentation/d/1K_Scbv3mZxef9kGwv5TDlSBf7z-veDFiJ-uB1RL6Soc/edit#slide=id.g1861bf60d5_0_6


=Links=
=Links=
*[[CEB Press Controller Genealogy]]
*[[CEB Press Controller Genealogy]]

Latest revision as of 20:20, 11 May 2019

Working Document

October 2017

Wiring and Pressing Sequence

The following diagrams show the electrical and plumbing connections. Note that since October, we switched to a single, 2-valve subplate, as opposed to 2 single subplates. This addresses back pressure issues, as subplates are rated for 2000 PSI back pressure from downstream valves.

The document also shows the full sequence of pressing steps under automatic operation.

edit


August 2017

edit

Bill of Materials

tools

Diagram

Arduino with OSE Controller Board

arduino + relay w/ plain wire

drive

  • Zener Diode
  • Resistor 10K
  • Diode

arduino + relay module + DPDT toggle switches w/ plain wire

DPDT Switches used to operate solenoids and send 5v signal to arduino that solenoid is engaged, or auxilary use.

drive

  • (9) one position .1" connector [1]
  • (2) four position .1" connector [2]
  • (1) five position .1" connector [3]
  • (1) six position .1" connector [4]
  • (6) M-F crimped .1" cable [5] [6]
  • (8) M-M crimped .1" cable [7] [8]

arduino + relay module + DPST push button switches w/ plain wire

gdrive

  • (4) push button 4P DPST switch digikey waytek
    • 13/16" hole
  • (22) 0.187 Female Quick Connect Insulated Terminals Mouser
    • optional 16-14 awg crimp end digikey
  • (4) PG-7 Cable Glands 0.11" to 0.25" Grainger
    • 1/2" hole
  • (4) PG-7 Lock Nuts Grainger

arduino + relay module + DPST push button switches w/ ethernet CAT5 cable

gdrive

Wire Harnesses

gdrive

Troubleshooting

https://docs.google.com/presentation/d/1K_Scbv3mZxef9kGwv5TDlSBf7z-veDFiJ-uB1RL6Soc/edit#slide=id.g1861bf60d5_0_6

Links

Retrieved from "https://wiki.opensourceecology.org/index.php?title=CEB_Press_Controller_v17.08&oldid=191622"