Revision as of 02:25, 8 November 2019

CAD

D3D v19.11 - FreeCAD -File:D3d1911.fcstd
16" Frame - FreeCAD -File:Frame16.fcstd
Angle Connector. - FreeCAD with McMaster 6 mm nut -File:Angleconnector.fcstd. Finished STL - File:Anglecorner.stl
Angle Connector with axis mount, left side. - FreeCAD - File:Leftcorner.fcstd. Finished STL - File:Leftcorner.stl
Angle Connector with axis mount, right side. - FreeCAD - File:Rightcorner.fcstd. Finished STL - File:Rightcorner.stl
Y Axis from v19.06. - FreeCAD - File:Yaxisfrom1906.fcstd.
X axis from v19.06. - FreeCAD - File:Xaxisfrom1906.fcstd.
Carriage motor merge. - FreeCAD - File:Carriage motor merge.fcstd. STL - File:Carriage motor merge.stl
Carriage half-carriage merge. - FreeCAD - File:Carriage halfcarriage merge.fcstd. STL - File:Carriage halfcarriage merge.stl.
Carriage extruder bracket merge. - FreeCAD - File:Integrated carriage.fcstd. STL - File:Integrated carriage.stl
Frame clip - FreeCAD - File:Frameclip.fcstd. STL - File:Frameclip.stl
Frame clip - FreeCAD - File:Carriage idler merge.fcstd. STL - File:Carriage idler.stl

@@ Line 29: / Line 29: @@
 File:frameclip.png|'''Frame clip''' - FreeCAD - [[File:frameclip.fcstd]]. STL - [[File:frameclip.stl]]
-File:carriageidler.png|'''Frame clip''' - FreeCAD - [[Carriage_idler_merge.fcstd]]. STL - [[File:carriage_idler.stl]]
+File:carriageidler.png|'''Frame clip''' - FreeCAD - [[File:Carriage_idler_merge.fcstd]]. STL - [[File:carriage_idler.stl]]
 </gallery>