Revision as of 03:31, 7 December 2019

Notes

Result with 1.2 - idler screw by spring has no meat on 1 mm thick web under screw.
Holes are egged out on side
May work because it's quite stiff.
Try with 1 mm nozzle

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Dimensions	User	Comment
current	22:45, 21 July 2020	(140 KB)	Marcin (talk \| contribs)	Version with shallower spring hole by 2 mm. Deepening of side holes to 18 mm for part count reduction. Chamfer for print removal.
	07:26, 13 January 2020	(110 KB)	Marcin (talk \| contribs)	Laid flat.
	22:09, 12 January 2020	(110 KB)	Marcin (talk \| contribs)	Deepened mounting bolt hole by 0.5 mm, thickened up the spring mount with + larger hole
	05:46, 9 January 2020	(99 KB)	Marcin (talk \| contribs)	Corrected for 1.2 mm nozzle production engineering.
	04:33, 7 December 2019	(81 KB)	Marcin (talk \| contribs)	With gussets, thicker web, chamfer
	03:31, 6 December 2019	(68 KB)	Marcin (talk \| contribs)

You cannot overwrite this file.

The following 5 pages use this file:

@@ Line 3: / Line 3: @@
 [[File:exrudermain.png|500px]]
+*Result with 1.2 - idler screw by spring has no meat on 1 mm thick web under screw.
+*Holes are egged out on side
+*May work because it's quite stiff.
+*Try with 1 mm nozzle