File:Jeremyplot+drill.ini: Difference between revisions
Jump to navigation
Jump to search
(Change File Extension back to .gcode after download) |
No edit summary |
||
| Line 1: | Line 1: | ||
Change File Extension back to .gcode after download | Change File Extension back to .gcode after download | ||
This file contains code to plot the traces (not pads) and then drill the pads. Use a thick marker for plotting, and a fine mill bit for drilling. | |||
TODO: Add a third pass with a fine marker to trace out pads. | |||
Latest revision as of 16:07, 14 March 2020
Change File Extension back to .gcode after download
This file contains code to plot the traces (not pads) and then drill the pads. Use a thick marker for plotting, and a fine mill bit for drilling. TODO: Add a third pass with a fine marker to trace out pads.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Dimensions | User | Comment | |
|---|---|---|---|---|
| current | 16:05, 14 March 2020 | (23 KB) | Jeremyd (talk | contribs) | Change File Extension back to .gcode after download |
You cannot overwrite this file.
File usage
The following page uses this file: