D3D v20.04 Data Collection: Difference between revisions
Jump to navigation
Jump to search
| Line 9: | Line 9: | ||
=Physical= | =Physical= | ||
*Print volume - 12x12x10 inches - 1440 cu in - or 24 lb max weight of print. | *Print volume - 12x12x10 inches - 1440 cu in - or 24 lb max weight of print. | ||
=Bed Weight Holding Capacity= | |||
*From [[D3D v20.04 Calculations]], bed is 13.5 lb, and we should be able to lift a total of 40 lb withe the stepper motors. | |||
*Weight of 1/8" steel plate, 8x8" - 2.3 lb | |||
=Links= | =Links= | ||
*[[D3D_v20.04]] | *[[D3D_v20.04]] | ||
Revision as of 05:32, 20 April 2020
Stepper Drivers
- DRV 8825 is used for more current on Z. [1]
- Initially, one side motor on Z was 44 mm long (17PM-K402-P4V Minebea Motor Mfg Corp, V and A not shown), and the other was 48 mm long (17PM-K402-P5VS, 3.9V 1.3A). *Small motor was easy to stop - pound or 2, whereas larger motor was more like 10lb to stop.
Heating Time
- Extruder - at 11C from 11C to 230C - 2:15
- Bed - 2:47 at 11C from 11C-100C, 20C hysteresis at top
Physical
- Print volume - 12x12x10 inches - 1440 cu in - or 24 lb max weight of print.
Bed Weight Holding Capacity
- From D3D v20.04 Calculations, bed is 13.5 lb, and we should be able to lift a total of 40 lb withe the stepper motors.
- Weight of 1/8" steel plate, 8x8" - 2.3 lb