Open Source Pedal Powered Quadracycle: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
(Added some more links under the "Internal Links" section)
(Added some more links under the "Industry Standards" Section)
 
(14 intermediate revisions by the same user not shown)
Line 3: Line 3:
*Original Version will be a Two Seat, with a small trunk, and a trailer hitch
*Original Version will be a Two Seat, with a small trunk, and a trailer hitch
*A Cheap People/Cargo Mover for local areas (no fuel, little maitnence)
*A Cheap People/Cargo Mover for local areas (no fuel, little maitnence)
It goes as follows:
*Modular, so can start out as frame + drivechain + seats only, and grow into essentially an ac-less small car (low speed)
*Can also add a motor (assist) later if desired


=Industry Standards=
=Industry Standards=
*[[Rhoades Car]]
*[[Rhoades Car]]
 
*[https://www.rswart.org/fourwhel.htm A Forum Post On All/Most Available Producers]
*[http://www.xyzcargo.com/cycles/ XYZ Cargo Company]


=Existing Open Source Designs=
=Existing Open Source Designs=
Line 13: Line 15:
*[https://newatlas.com/n55-xyz-spaceframe-vehicles/24163/ An Article on It]
*[https://newatlas.com/n55-xyz-spaceframe-vehicles/24163/ An Article on It]
*[http://www.n55.dk/MANUALS/SPACEFRAMEVEHICLES/spaceframevehicles.html The Source]
*[http://www.n55.dk/MANUALS/SPACEFRAMEVEHICLES/spaceframevehicles.html The Source]
==American Speedster==
*Seem to be made with PVC Pipe?
*[https://americanspeedster.com/ Their Website]
==University Studies/Designs==
*[https://digitalcommons.calpoly.edu/cgi/viewcontent.cgi?referer=https://www.google.com/&httpsredir=1&article=1063&context=mesp California Polytechnic State University, San Luis Obispo - "The Quadricycle Hand and Foot Cycle" ]  (used hand pedals too (and turning via seat twisting?) , not too needed, but intresting)


=Minimum Viable Product=
=Minimum Viable Product=
*
*
=Rough Sketches=
==Top Down View==
*[https://wiki.opensourceecology.org/wiki/File:Quadracycle_Top_Down_View_Rough_Sketch_V1.png File Link (To Prevent Page Clutter) ]


=Basic Design=
=Basic Design=
==Part A==
==Frame==
*
*Thinking Pipe or Tube
*PVC Pipe, [[Fiber Reinforced Pipe]] ,  [[Steel Pipe]] / [[Steel Tube]] / [[Aluminium Pipe]] / [[Aluminium Tube]]
*Also want it to be at least dissasembleable to module sections (ie not all welded, use bolts for maitnenece/upgrading)
 
==Seats==
*OTS or DIY
 
==Drivetrain==
*Two pedals (one for each person)
*Clutch on each for each person being able to not have feet "pushed" if not pedaling, or if there is not a seccond person
*Then goes to a gearbox
*Then goes to both wheel axles (possibly a differental on each)?
*Also optional [[KERS]] using a flywheel and clutch for non-electric boost for stop/go and hills etc
 
==Wheels==
*Most likely standard "bike" tires+wheels
*May need non-spoke versions for better load capacity (ie more like motorcycle/car wheel hubs)
 
==Windsheild==
*Cut Acrylic With Add-on Frame
 
==Onboard Battery==
*Small battery up to a 12v lead acid for onboard electronics, and systems (if wanted)
*Could also add a roof mounted flexible solar cell array
*Then misc things like headlights, turn signals, bike computer, internal lights, radio/stereo/gps etc


==Part/Componet B==
==Trailer Hitch==
*What is the "standard" ?


=BOM=
=BOM=
Line 32: Line 70:
*[[Velomobile]]
*[[Velomobile]]
*[[Fibre Reinforced Pipe 3D Printer]] possible structual material
*[[Fibre Reinforced Pipe 3D Printer]] possible structual material
*[[Modular Vehicles]]
*[[Team Wikispeed]]
*[https://wiki.opensourceecology.org/wiki/Construction_Sets#Vehicles This Part of the "Construction Sets" page]
*[[Open Source Small Vehicle Modular Trailer]]


=External Links=
=External Links=
*[https://en.wikipedia.org/wiki/Quadracycle The Wikipedia Page on Quadracycles]
*[https://en.wikipedia.org/wiki/Quadracycle The Wikipedia Page on Quadracycles]
*[https://en.wikipedia.org/wiki/Quadricycle_(EU_vehicle_classification) The Wikipedia Page on The EU Classification of Quadrocycles]
*[https://grabcad.com/library?page=1&time=all_time&sort=recent&query=pedal%20vehicle A [[GrabCAD]] Search on Pedal Vehicles]

Latest revision as of 00:00, 18 July 2020

Basics

  • A Four Wheeled Bicycle of sorts
  • Original Version will be a Two Seat, with a small trunk, and a trailer hitch
  • A Cheap People/Cargo Mover for local areas (no fuel, little maitnence)
  • Modular, so can start out as frame + drivechain + seats only, and grow into essentially an ac-less small car (low speed)
  • Can also add a motor (assist) later if desired

Industry Standards

Existing Open Source Designs

N55 System

American Speedster

University Studies/Designs

Minimum Viable Product

Rough Sketches

Top Down View

Basic Design

Frame

Seats

  • OTS or DIY

Drivetrain

  • Two pedals (one for each person)
  • Clutch on each for each person being able to not have feet "pushed" if not pedaling, or if there is not a seccond person
  • Then goes to a gearbox
  • Then goes to both wheel axles (possibly a differental on each)?
  • Also optional KERS using a flywheel and clutch for non-electric boost for stop/go and hills etc

Wheels

  • Most likely standard "bike" tires+wheels
  • May need non-spoke versions for better load capacity (ie more like motorcycle/car wheel hubs)

Windsheild

  • Cut Acrylic With Add-on Frame

Onboard Battery

  • Small battery up to a 12v lead acid for onboard electronics, and systems (if wanted)
  • Could also add a roof mounted flexible solar cell array
  • Then misc things like headlights, turn signals, bike computer, internal lights, radio/stereo/gps etc

Trailer Hitch

  • What is the "standard" ?

BOM

CAD

Internal Links

External Links

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Open_Source_Pedal_Powered_Quadracycle&oldid=228049"