3D Printer Design for Manufacturing: Difference between revisions
Jump to navigation
Jump to search
(Created page with " =Part Reduction Log= *1 screw count was reduced in the extruder, July 2020 - [https://wiki.opensourceecology.org/wiki/File:Mainextruderpart.fcstd#Notes]") |
No edit summary |
||
Line 1: | Line 1: | ||
=Printing Orientation= | |||
=Slicing Preview= | |||
*Preview the slicing to make sure holes, for example in the extruder, come out properly. Show that this is the case for 1.2 mm nozzles. | |||
=Part Reduction Log= | =Part Reduction Log= | ||
*1 screw count was reduced in the extruder, July 2020 - [https://wiki.opensourceecology.org/wiki/File:Mainextruderpart.fcstd#Notes] | *1 screw count was reduced in the extruder, July 2020 - [https://wiki.opensourceecology.org/wiki/File:Mainextruderpart.fcstd#Notes] |
Revision as of 22:13, 21 July 2020
Printing Orientation
Slicing Preview
- Preview the slicing to make sure holes, for example in the extruder, come out properly. Show that this is the case for 1.2 mm nozzles.
Part Reduction Log
- 1 screw count was reduced in the extruder, July 2020 - [1]