File:Mainextruderpart.fcstd
Mainextruderpart.fcstd (file size: 243 KB, MIME type: application/zip)
Warning: This file type may contain malicious code.
By executing it, your system may be compromised.
Notes
- 17:00, 21 July 2020 Reduces part count by 1 if it works, as it no longer requires 8 mm screws, which can be replaced by 18 mm screws, that are already used.
- 01:53, 9 January 2020 - does not belong here and is not the latest part (since then the fan duckt has been trimmed and the duct hole corrected on the exit side
- 21:33, 8 January 2020 - trimmed down base by 2 mm - and turned to dumb file
- Trim base by 1.5 mm so motor can fit better - fan will be 1.5 mm too high but that's ok.
File history
Click on a date/time to view the file as it appeared at that time.
(newest | oldest) View (newer 10 | older 10) (10 | 20 | 50 | 100 | 250 | 500)Date/Time | Dimensions | User | Comment | |
---|---|---|---|---|
current | 22:42, 21 July 2020 | (243 KB) | Marcin (talk | contribs) | Dumb version with chamfer for print removal. |
22:00, 21 July 2020 | (956 KB) | Marcin (talk | contribs) | Shallowed spring hole by 2 mm, and deepened 3 side screw holes from 8 to 18 mm. | |
22:08, 12 January 2020 | (488 KB) | Marcin (talk | contribs) | Enlarged spring holder pocket to 10.8 mm diameter, and thickened bottom of spring holder by 0.5 mm | |
22:02, 12 January 2020 | (338 KB) | Marcin (talk | contribs) | Deepened mount hole by 0.5 mm and widened the spring holder by 1.5 mm | |
07:53, 9 January 2020 | (581 KB) | Marcin (talk | contribs) | Thickened and hole positions corrected | |
05:15, 9 January 2020 | (62 KB) | Marcin (talk | contribs) | Part named correctly. | |
04:11, 9 January 2020 | (59 KB) | Marcin (talk | contribs) | Dumb object. | |
04:10, 9 January 2020 | (640 KB) | Marcin (talk | contribs) | Fixed up all holes. | |
03:43, 9 January 2020 | (262 KB) | Marcin (talk | contribs) | Plugged up 2 side holes. | |
03:38, 9 January 2020 | (156 KB) | Marcin (talk | contribs) | Trimmed out hole in addition to lowering motor base by 2 mm |
- You cannot overwrite this file.
File usage
The following 5 pages link to this file: