3D Printing Filament: Difference between revisions
Jump to navigation
Jump to search
(→Links) |
(→More) |
||
| Line 20: | Line 20: | ||
*[[Why a Gearless Extruder Works for 3 mm Filament]] | *[[Why a Gearless Extruder Works for 3 mm Filament]] | ||
*[[PLA Filament Sourcing]] | *[[PLA Filament Sourcing]] | ||
*[[ | *[[Marlin Filament Width Sensor]] | ||
*[[ | *[[German Filament Extruder]] | ||
*[[ | *[[Recycled Filament]] | ||
*[[ | *[[Lyman Filament Maker Calculations]] | ||
*[[ | *[[Abrasive 3D Printing Filament]] | ||
*[[ | *[[Wood 3D Printing Filament]] | ||
*[[ | *[[Porous Rubber Filament]] | ||
*[[ | *[[Cellulose 3D Printing Filament]] | ||
*[[ | *[[Lyman Filament Extruder]] | ||
*[[ | *[[High Temperature Filaments]] | ||
*[[ | *[[PEI Filament]] | ||
Revision as of 20:18, 12 October 2020
OSE Choice
- Standard for OSE - [1]. 2.85 mm preferred. 1.75 will work but not as well, depending on use case.
- Standard TPU for OSE - [2] or search accordingly. Definitely 2.85 mm, not 1.75 mm.
Links
- http://reprap.org/wiki/Feeding_filament
- Composite FDM Filaments
- Lyman Filament Extruder
- Filament Extruder
More
- Largest 3D Printing Filament Spool
- Open Source Filament Maker
- Filament Swapping Devices
- Flexible Filaments
- TPU
- Antibacterial Filament
- Acetal Filament
- Why a Gearless Extruder Works for 3 mm Filament
- PLA Filament Sourcing
- Marlin Filament Width Sensor
- German Filament Extruder
- Recycled Filament
- Lyman Filament Maker Calculations
- Abrasive 3D Printing Filament
- Wood 3D Printing Filament
- Porous Rubber Filament
- Cellulose 3D Printing Filament
- Lyman Filament Extruder
- High Temperature Filaments
- PEI Filament