D3D v20.04.27 Software: Difference between revisions
Jump to navigation
Jump to search
(→Marlin) |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 17: | Line 17: | ||
#define CUSTOM_MACHINE_NAME "OSE D3D Pro 3"#define CUSTOM_MACHINE_NAME "OSE D3D Pro 3" | #define CUSTOM_MACHINE_NAME "OSE D3D Pro 3"#define CUSTOM_MACHINE_NAME "OSE D3D Pro 3" | ||
Note also: since [[D3D Pro 2]] - the Z probing speed has been changed 3x faster so that the bed raises and probes faster. This will reduce the torque on z, so that reducing this will help get more Z carrying capacity on the bed. D3D Pro 3 v2 carries only 4.5 kg extra weight on homing, which would likely rise if homing speed were slower to increase motor torque. | |||
=PID Autotuning= | =PID Autotuning= | ||
| Line 23: | Line 26: | ||
=3D printer Profile= | =3D printer Profile= | ||
[[File:D3D_pro_3.ini]] | |||
#Move over more to hit bed | #Move over more to hit bed | ||
#Do autoparallel | #Do autoparallel | ||
Latest revision as of 01:23, 16 March 2021
Marlin
Download
Change Log
Values changed to:
- define Y_MAX_POS 457// 18x18x17 inch bed
- define X_MAX_POS 457
- define Z_MAX_POS 432
- define LEFT_PROBE_BED_POSITION 120 // 4 corners for probing are larger.
- define RIGHT_PROBE_BED_POSITION 350 //
- define FRONT_PROBE_BED_POSITION 120 //
- define BACK_PROBE_BED_POSITION 350
- define CUSTOM_MACHINE_NAME "OSE D3D Pro 3"#define CUSTOM_MACHINE_NAME "OSE D3D Pro 3"
Note also: since D3D Pro 2 - the Z probing speed has been changed 3x faster so that the bed raises and probes faster. This will reduce the torque on z, so that reducing this will help get more Z carrying capacity on the bed. D3D Pro 3 v2 carries only 4.5 kg extra weight on homing, which would likely rise if homing speed were slower to increase motor torque.
PID Autotuning
See PID Autotune
3D printer Profile
- Move over more to hit bed
- Do autoparallel