Latest revision as of 17:30, 27 June 2021

Nested for 2 Extruder Pieces

Fits on 8" bed, not 6"

2 Extruder Pieces nested for printing. File:Totalext.fcstd. STL - File:Totalext.stl

Result with 1.2 - idler screw by spring has no meat on 1 mm thick web under screw.
Holes are egged out on side
May work because it's quite stiff.
Try with 1 mm nozzle

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Dimensions	User	Comment
current	22:45, 21 July 2020	(140 KB)	Marcin (talk \| contribs)	Version with shallower spring hole by 2 mm. Deepening of side holes to 18 mm for part count reduction. Chamfer for print removal.
	07:26, 13 January 2020	(110 KB)	Marcin (talk \| contribs)	Laid flat.
	22:09, 12 January 2020	(110 KB)	Marcin (talk \| contribs)	Deepened mounting bolt hole by 0.5 mm, thickened up the spring mount with + larger hole
	05:46, 9 January 2020	(99 KB)	Marcin (talk \| contribs)	Corrected for 1.2 mm nozzle production engineering.
	04:33, 7 December 2019	(81 KB)	Marcin (talk \| contribs)	With gussets, thicker web, chamfer
	03:31, 6 December 2019	(68 KB)	Marcin (talk \| contribs)

You cannot overwrite this file.

The following 5 pages use this file:

@@ Line 1: / Line 1: @@
-=Notes=
+=Nested for 2 Extruder Pieces=
+Fits on 8" bed, not 6"
+<gallery perrow=6>
+File:totalext.png|'''2 Extruder Pieces nested for printing.''' [[File:totalext.fcstd]]. STL - [[File:totalext.stl]]
+</gallery>
+=Notes with Newest on Top=
+*Settigns - 1.2 - 0.9 wall thickness works - bottom and top is 2.4 mm
+[[File:extrudermainnew.jpg|400px]]
+*Settings - 1.2 nozzle but thin wall - 0.7 - to allow holes to work
+[[File:extrudermainthinwall.png|500px]]
 *Settings - 1.2 nozzle