Revision as of 14:53, 30 May 2022

Concept:

electronic fuel injection, thus fully adjustable timing. See Arduino Speed.
common rail
piston-wise stackable with common fluid channels and fins for cooling.
Modular fans for cooling
Direct hydraulic drive, independent pistons. Combined at output.
Pistons are independent but balanced in pairs
Independent operation means you can fire from 1 to n pistons at a time
Cutoff optimized for high efficiency, cutoff fully controllable with position sensors.
Low speed for long life, 300 RPM and under.
Viable for planes, trains, and automobiles
Base unit is 1kW
Larger unit is 10kW per.
Pistons are 3" typ for 10kW
Each block is 4" wide
Each block is sideways stackable and operable in any orientation (upside down)
v12 is 2 rows of 6, and thus 24" long
Blocks can operate from single to infinitely scalable.
Scaling (fluid combining) occurs at control valve or plumbing before valve

@@ Line 2: / Line 2: @@
 #electronic fuel injection, thus fully adjustable timing. See [[Arduino Speed]].
 #common rail
-#piston-wise stackable with common fluid channels
+#piston-wise stackable with common fluid channels and fins for cooling.
+#Modular fans for cooling
+#Direct hydraulic drive, independent pistons. Combined at output.
+#Pistons are independent but balanced in pairs
+#Independent operation means you can fire from 1 to n pistons at a time
+#Cutoff optimized for high efficiency, cutoff fully controllable with position sensors.
+#Low speed for long life, 300 RPM and under.
+#Viable for planes, trains, and automobiles
+#Base unit is 1kW
+#Larger unit is 10kW per.
+#Pistons are 3" typ for 10kW
+#Each block is 4" wide
+#Each block is sideways stackable and operable in any orientation (upside down)
+#v12 is 2 rows of 6, and thus 24" long
+#Blocks can operate from single to infinitely scalable.
+#Scaling (fluid combining) occurs at control valve or plumbing before valve
 =Links=

Open Source Stackable Engine: Difference between revisions