Thermal Insert Press: Difference between revisions
Jump to navigation
Jump to search
(Minor Clarification) |
(Added some more links under the "Internal Links" section) |
||
| Line 8: | Line 8: | ||
=Internal Links= | =Internal Links= | ||
* | *[[Threaded Inserts]] | ||
=External Links= | =External Links= | ||
*[https://www.youtube.com/watch?v=CEdtyCNJDfY A Video by the YouTube Channel "John Culbertson" Titled "3D Printed Thermal Insert Press" ] | *[https://www.youtube.com/watch?v=CEdtyCNJDfY A Video by the YouTube Channel "John Culbertson" Titled "3D Printed Thermal Insert Press" ] | ||
*[https://www.youtube.com/watch?v=bbsD-3_AP_0 A Video by the YouTube Channel "Adafruit Industries" Titled "Heat Set Insert Press" ] | *[https://www.youtube.com/watch?v=bbsD-3_AP_0 A Video by the YouTube Channel "Adafruit Industries" Titled "Heat Set Insert Press" ] | ||
Revision as of 03:05, 28 October 2022
Basics
- A Device for Thermal Insertion of Metal Components into Thermoplastic Components
- Allows things like Threaded Inserts to be inserted into Thermoplastics
- More accurate, and efficient, than doing so by hand
- Can probably also be adapted to Thermal Stapling ( Hot Stapling seems to be a more common term?), Heat Staking etc
- Uses a similar mechanism as the Drill Press for the motion, but uses a Soldering Iron like device for heating the custom toolhead (perhaps a screwdriver?)
- May also have use for precisely cutting thick synthetic rope (devices like this are in some marine supply stores etc, but are often out of reach, this with a blade toolhead, and a rope holding+tensioning jig...)