Eric's Data Buffer Page: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
(Added some more links under the "Temporary Trashcan" Section)
(Added some more information)
Line 65: Line 65:
*This is along the lines of [[Dilbit]] / [[Synbit]] / [[Fuel Oil]] , but this is a study i found a while back and documenting here.  I came across it when looking into [[Fuel Storage]] / [[Fuel Settling]] etc:
*This is along the lines of [[Dilbit]] / [[Synbit]] / [[Fuel Oil]] , but this is a study i found a while back and documenting here.  I came across it when looking into [[Fuel Storage]] / [[Fuel Settling]] etc:
**[https://pubs.acs.org/doi/full/10.1021/acsomega.1c05660 A 2022 Study Titled "Comparative Study of Light Cycle Oil and Naphthalene as an Adequate Additive to Improve the Stability of Marine Fuels" ]
**[https://pubs.acs.org/doi/full/10.1021/acsomega.1c05660 A 2022 Study Titled "Comparative Study of Light Cycle Oil and Naphthalene as an Adequate Additive to Improve the Stability of Marine Fuels" ]
*Some Stuff on [[Surface Treatment]] :
**I was originally looking into [[Diamond Like Carbon]] (and/or full on Monocrystaline [[Chemical Vapor Deposition]] formed diamond) due to the high heat conductivity, low friction, and high strength (although ability to be scratched =/= ability to be shattered/fractured i'd assume, so i'm intrigued about that
**Either way in looking up that i came across this video ( [https://youtu.be/AunRiiSidBE "Why Do NASCAR Teams Use This Technology? | Calico DLC Coatings [TECH TALK]" by "High Performance Academy" ] ~14 Minute Watch) where someone was discussing it's Automotive Applications
***In the comments, someone mentioned:
**** "WPC and Deep Cryogenic Processing.  You DCT first then WPC.. and applying Ceramic Coatings and Thermal dispersants to the correct areas does some amazing things"
**WPC was some sort of super secret [[Shot Peening]] but with powder, as per [https://www.motortrend.com/how-to/turp-0902-shot-peening-wpc-treatment/ This Motor Trend Article, "Shot Peening & WPC Treatment - Special Treatment, Part 1 - Tech" ]
*In terms of Deep Cryogenic Treatment (DCT), i found these articles posted on Thermal Processing Magazine's Website:
**[https://thermalprocessing.com/deep-cryogenic-treatment/ Deep Cryogenic Treatment - By Frederick J. (Rick) Diekman -April 5, 2013 - DCT is a very important process to the gear making industry. If done correctly, it can increase product durability and reduce tooling costs. ]
**[https://thermalprocessing.com/take-another-look-at-deep-cryogenic-treatment/ Take Another Look at Deep Cryogenic Treatment - By Frederick Diekman -January 15, 2020 - Research being done on this process is showing that it can be advantageous to creating longer-lasting products and tools that cost less. ]


==4/29/2020==
==4/29/2020==

Revision as of 02:18, 6 November 2022

Basics

  • A Page where User:Eric dumps links pre "putting them in the right place"
  • A more orderly, open, and non "500 deep bookmark" method
  • Should be promptly emptied

From Eric Lotze Log

Temporary "Interesting Link That I Will Find/Make Pages For" Area

Environmental Stuff to Cover Elsewhere/Look Into

List

11/5/2022


4/29/2020

5/1/2020

Internal Links

External Links