Supervolcano Nozzle: Difference between revisions
Jump to navigation
Jump to search
(→Basics) |
(→Basics) |
||
| Line 4: | Line 4: | ||
*Supervolcano is the fastest nozzle and extruder - capable of extruding up to 10 lb of material per day. | *Supervolcano is the fastest nozzle and extruder - capable of extruding up to 10 lb of material per day. | ||
**(This is from the "Revision as of 18:04, 16 January 2021" ) This reccord may be now surpassed by the [[Golliath Hotend]] | **(This is from the "Revision as of 18:04, 16 January 2021" ) This reccord may be now surpassed by the [[Golliath Hotend]] | ||
=Other Brands= | |||
*Mosquito - 60 mm3/sec TPU [https://www.sliceengineering.com/products/mosquito-prime?variant=43989795340529] | |||
=Clones= | =Clones= | ||
Revision as of 22:56, 29 December 2024
Hint: E3D site shows 200g/hr Print Rate, or about 5kg/day.
Basics
- Supervolcano is the fastest nozzle and extruder - capable of extruding up to 10 lb of material per day.
- (This is from the "Revision as of 18:04, 16 January 2021" ) This reccord may be now surpassed by the Golliath Hotend
Other Brands
- Mosquito - 60 mm3/sec TPU [1]
Clones
- Clones now exist on Aliexpress with 4 nozzles - $50 - [2]
- 0.4 to 1.2 mm supervolcanoes at $8.40 each - [3]
Shorter Long Nozzles
- 32 mm long - [4]
Internal Links
- Scalable Heater Block (OSE development to improve on the concept of the Supervolcano)
- Supervolcano Heater Block
- D3D Pro v20.07
- D3D v20.04.27
External Links
- The E3D Official Website/Store's Page on the E3D Supervolcano
- As of this edit, if not buying a nozzle kit option (ie just the included 1mm FDM 3D Printer Nozzle ) it is:
- $132.00 USD for the 12v Version and 119.00 USD for the 24v Version
- + Taxes and Shipping
- ( User: Eric here, did every step up until paying and got $28.00 for non-rapid shipping, ("FedEx® International Connect Local Postal Service" ) so a total of $160.00 assuming there are no suprises mid-shipping (import charged when it lands in the border etc) for the 12v version )
- As of this edit, if not buying a nozzle kit option (ie just the included 1mm FDM 3D Printer Nozzle ) it is:
- A Video by the YouTube Channel "The 3D Print General" Titled "Taking it to the Extreme with the SUPER Volcano" ( ~15 Minute Watch )
- A Video by the YouTube Channel "Ooznest" Titled "Setting Up & Printing With the E3D Super Volcano | Ooznest" ( ~4 Minute Watch )
- Goes over modifications needed due to the longer "stick out length" ; extensions to the mount for Touch Probes and other Bed Leveling Probes etc