A-Z Instructionals: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
No edit summary
Line 60: Line 60:
#[http://makeprojects.com/Project/Structural-Components/1437/1 Assemble the structural components]
#[http://makeprojects.com/Project/Structural-Components/1437/1 Assemble the structural components]
#[http://makeprojects.com/Project/CEB-Press-Prototype-III-Assembly-Soil-loading-system/1471/1 Assemble the Soil Loading System]
#[http://makeprojects.com/Project/CEB-Press-Prototype-III-Assembly-Soil-loading-system/1471/1 Assemble the Soil Loading System]
#[http://makeprojects.com/Project/CEB-Shaker-Assembly/1728/1 Shaker Assembly] -Still needs fab drawings, assembling hydraulics needs to be above this, model
#[http://makeprojects.com/Project/CEB-Press-Prototype-III-Assembly-Adjusting-the-drawer/1447/1 Adjust the Drawer]
#[http://makeprojects.com/Project/CEB-Press-Prototype-III-Assembly-Adjusting-the-drawer/1447/1 Adjust the Drawer]
#[http://makeprojects.com/Project/CEB-Press-Prototype-III-Assembly-Installing-the-secondary-cylinder/1489/1 Install the secondary cylinder]
#[http://makeprojects.com/Project/CEB-Press-Prototype-III-Assembly-Installing-the-secondary-cylinder/1489/1 Install the secondary cylinder]

Revision as of 20:18, 16 December 2011

THIS PAGE IS FOR THE CEB PRESS


CEB instructionals to be transfered to Make Projects
CEB instructionals CAD Requests

Fabrication

Note: All make pages need a BOM for steps.

Structural Components

  1. Simple Plates
  2. Frame structural support components-Still needs fab drawings

Soil Loading System

Shaker

  1. Shaker Mount-Still needs fab drawings
  2. Shaker Hammer and Shaft-Still needs fab drawings, model
  3. Shaker Hydraulics

    Hopper and Grate

  4. Hopper Supports and Grate Mounts
  5. Hopper Sheet Metal-Still needs fab drawings
  6. Hopper Mounting plate
  7. Grate-Still needs fab drawings

    Machine Core

  8. Soil Loading Drawer-Still needs fab drawings
  9. Roller Guides-Still needs fab drawings, model

    Main Frame

    Main Frame Preparation
  10. Wide Cylinder Supports
  11. Main Frame Small Components
  12. Main Frame U-Channel Prep-Still needs fab drawings, model
    Main Cylinder Preparation
  13. Make the Press Feet
  14. Prepare the main cylinder-needs model
    Main Frame Assembly
  15. Main Frame- Assemble U Channel Still need to be added in MAKE:

    Soil Loading System


    Assembling the frame

    You'll need to have finished all other components in Machine Core and Frame Preparation and 2 Leg Holders

    Hydraulics

    Shaker Assembly -Still needs fab drawings, assembling hydraulics needs to be above this, model

    Assembly

    Before beginning assembly, insure you have finished all of the components listed above in the fabrication step.

    1. Assemble the structural components
    2. Assemble the Soil Loading System
    3. Shaker Assembly -Still needs fab drawings, assembling hydraulics needs to be above this, model
    4. Adjust the Drawer
    5. Install the secondary cylinder
    6. Hard-line the main cylinder

    Programming

    An Arduino is the microprocessor that controls the CEB Press's actions. It must be programmed with the CEB Press's unique program for making bricks.

    Source code can be found at github: https://github.com/OSE/ceb-controller

    Old code:

Retrieved from "https://wiki.opensourceecology.org/index.php?title=A-Z_Instructionals&oldid=48270"