A-Z Instructionals: Difference between revisions
Jump to navigation
Jump to search
| Line 40: | Line 40: | ||
<ol><li value="17">[http://makeprojects.com/Project/CEB-Main-Frame-Assemble-U-Channel/1740/1 Assemble U Channel]-needs model | <ol><li value="17">[http://makeprojects.com/Project/CEB-Main-Frame-Assemble-U-Channel/1740/1 Assemble U Channel]-needs model | ||
<li>[http://makeprojects.com/Project/Fitting-the-Main-Cylinder/1414/1 Fit the Main Cylinder]-needs model | <li>[http://makeprojects.com/Project/Fitting-the-Main-Cylinder/1414/1 Fit the Main Cylinder]-needs model | ||
<li>[http://makeprojects.com/Project/CEB-Stretching-the-frame/1742/1 Stretch the frame]</ol> | <li>[http://makeprojects.com/Project/CEB-Stretching-the-frame/1742/1 Stretch the frame] | ||
<li>[http://makeprojects.com/Project/CEB-Frame-install-smaller-components-and-weld-spacers/1744/1 Weld the spacers]</ol> | |||
Revision as of 22:03, 16 December 2011
THIS PAGE IS FOR THE CEB PRESS
CEB instructionals to be transfered to Make Projects
CEB instructionals CAD Requests
Fabrication
Note: All make pages need a BOM for steps.
Structural Components
- Simple Plates
- Frame structural support components-Still needs fab drawings
Soil Loading System
Shaker
- Shaker Mount-Still needs fab drawings
- Shaker Hammer and Shaft-Still needs fab drawings, model
- Shaker Hydraulics
Hopper and Grate
- Hopper Supports and Grate Mounts
- Hopper Sheet Metal-Still needs fab drawings
- Hopper Mounting plate
- Grate-Still needs fab drawings
Machine Core
- Soil Loading Drawer-Still needs fab drawings
- Roller Guides-Still needs fab drawings, model
Main Frame
Main Frame Preparation
- Wide Cylinder Supports
- Main Frame Small Components
- Main Frame U-Channel Prep-Still needs fab drawings, model
Main Cylinder Preparation
- Make the Press Feet
- Prepare the main cylinder-needs model
Main Frame Assembly
- Assemble U Channel-needs model
- Fit the Main Cylinder-needs model
- Stretch the frame
- Weld the spacers
Still need to be added in MAKE:
Soil Loading System
Assembling the frame
You'll need to have finished all other components in Machine Core and Frame Preparation and 2 Leg Holders
Hydraulics
Shaker Assembly -Still needs fab drawings, assembling hydraulics needs to be above this, model
Assembly
Before beginning assembly, insure you have finished all of the components listed above in the fabrication step.
- Assemble the structural components
- Assemble the Soil Loading System
- Shaker Assembly -Still needs fab drawings, assembling hydraulics needs to be above this, model
- Adjust the Drawer
- Install the secondary cylinder
- Hard-line the main cylinder
Programming
An Arduino is the microprocessor that controls the CEB Press's actions. It must be programmed with the CEB Press's unique program for making bricks.
Source code can be found at github: https://github.com/OSE/ceb-controller
Old code: