Bulldozer Specification: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 4: | Line 4: | ||
*3000 psi | *3000 psi | ||
*[[15,000 inch pound hydraulic motor]] on each wheel | *[[15,000 inch pound hydraulic motor]] on each wheel | ||
**Each wheel has 4-fold gear reduction | |||
*30" diameter wheels, can be as wide as required to achieve desired traction | |||
*Use metal wheels as in [[Traction Engines]] | *Use metal wheels as in [[Traction Engines]] | ||
*Use 4-flange pillow block bearings with quick-disconnect wheels - see [[Quick Connect Wheels]] strategy for LifeTrac | *Use 4-flange pillow block bearings with quick-disconnect wheels - see [[Quick Connect Wheels]] strategy for LifeTrac | ||
Revision as of 17:02, 9 January 2012
- Use same frame as LifeTrac with modifications
- Use 4 Power Cubes for 128 hp of tractor power
- Use 2 Power Cubes per side to simplify hydraulic plumbing requirements
- 3000 psi
- 15,000 inch pound hydraulic motor on each wheel
- Each wheel has 4-fold gear reduction
- 30" diameter wheels, can be as wide as required to achieve desired traction
- Use metal wheels as in Traction Engines
- Use 4-flange pillow block bearings with quick-disconnect wheels - see Quick Connect Wheels strategy for LifeTrac
- Use 3" shaft
- 3" bearings - https://www.surpluscenter.com/item.asp?item=1-215-48-4-C&catname=powerTrans
- 4 wheel drive
- Must use bolt-through wheel attachment to shaft as in LifeTrac, u