6 in 60 Milestones

• The 6 in 60 Campaign promised the Microtractor, Bulldozer, Car, Truck, Backhoe, and Ironworker Machine. Current activity is in the Dashboard.
• Finishing these modules: Cab, Loader, Power Cube, Wheel, and Pivot. Not to mention the wheel base unit.
• At the same time, we are working on a build of the CNC torch table.

How well will this be finished? We are at June 12, and expect:

• Wikispeed car frame - suspension, rear drive, steering, and new 50 HP power cube to be finished.
  • 50hp Engine arriving on Friday, June 14. Recruited local VW master, Danny Brown - to help on car parts. Recruiting a local TIG welder for aluminum power cube fabrication. Working with Mike Hill for other CNC Torch Table Cutting. Tom Griffing did initial 50hp Power Cube work.
• Ironworker - by using the blade system from Prototype II, we can put together the Prototype III.
• Truck - will get a driving car, slow speed.
• Backhoe - will complete the machine
• Microtrac - will drive it.
• CNC Torch Table - aiming to get it up by June 28.
• Bulldozer - will build it.