Mike Hill Modular Wheel Units Order: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
Line 11: Line 11:
[https://docs.google.com/drawings/d/1V4tsbDBDGmTd_PJf5MTH9ptnxeMgqMD15aS5zBzw2VA/edit edit]
[https://docs.google.com/drawings/d/1V4tsbDBDGmTd_PJf5MTH9ptnxeMgqMD15aS5zBzw2VA/edit edit]


'''108 parts total - Complete DXFs here - [[File:hillparts.zip]]'''. Quantities of specific part below:
'''92 parts total - Complete DXFs here - [[File:hillparts.zip]]'''. Quantities of specific part below:


*'''[4] Part 1 - [[File:Wheel Mounts Part 1.dxf]]  
*'''[4] Part 1 - [[File:Wheel Mounts Part 1.dxf]]  

Revision as of 04:39, 24 June 2013

Introduction

These parts make:

  • one set of 3" shaft wheel units - for trucktor
  • one set of 1-7/8" shaft wheel units - for microtrac or bulldozer
  • One set of gear reduction units - for Bulldozer. Bulldozer uses 1-7/8" drive and 3" gear reduction.
  • 2 idler wheels for Microtrac

Parts

edit

92 parts total - Complete DXFs here - File:Hillparts.zip. Quantities of specific part below:

For geardown from here on, not shown above, see James_Log#Tue_Jun_18.2C_2013) - Geardownview.jpg -

Summary

Thisorder.jpg Mikecuts.jpg

Individual Views

Images

  • [4] Part 1 - Wheelpart1dxf.jpg
  • [8] Part 2 - Wheelpart2dxf.jpg
  • [4] Part 3 - Wheelpart3dxf.jpg
  • [8] Part 4 - Wheelpart4dxf.jpg
  • [10] Part 5 - Wheelpart5dxf.jpg
  • [2] Part 6 - Wheelpart6dxf.jpg
  • [10] Part 7 - Wheelpart7dxf.jpg
  • [14] Part 8 - Wheelpart8dxf.jpg
  • [2] Part 9 - Wheelpart9dxf.jpg
  • [10] Part 10 - Wheelpart10dxf.jpg
  • [10] Part 11 - Wheelpart11dxf.jpg
Retrieved from "https://wiki.opensourceecology.org/index.php?title=Mike_Hill_Modular_Wheel_Units_Order&oldid=98214"