Bulldozer/Manufacturing Instructions

Modules

Cab

edit cab

valves

four 4x16 plates from warehouse

two copies for 6 spool joystick valve

drill two holes

one of each for 2 spool valve

• torch corner
• drill one hole

• torch corner
• drill two holes

Bed

edit truck

Under side

Parts

• 4x4
  • 4 80"
  • 2 72"
• 8 Hinge Plates
• 2 QA mounts
  • 2 QD-SDS
  • 2 11T
• 2 Geardown modules
  • 2 45T
  • 1 Wheel mount
  • 1 Wheel

1. space the 72" 4x4s 80" apart
2. set two of the 80" 4x4s at either end of th 72" 4x4s
3. bolt corners together
4. set two 80" 4x4s 4inches inward from the first two
5. bolt together

1. place four of the hinge plates on the outer verticle face of the 72" 4x4s
2. bolt together
3. repeat on opposite 72"

1. mount quick attach wheel module 12inches from from the front of the left side 80" 4x4s
2. mout geardown module 8inches from quick attach wheel module
3. on opposite side mount the quick attach wheel module 44inches from the front
4. mount the geardown module 8inches in front of the quick attach wheel module

1. install the pivot shaft

Loader

Loader Arm Module Assembly

Powercube [5/5]

File:Powercube Complete 062413.skp

edit [1/5]

edit [2/5]

edit [3/5]

edit [4/5]

edit [5/5]