Torch Height Controller Discussions: Difference between revisions
Jump to navigation
Jump to search
(Created page with "=Chuck Log to Paul Log= Your cap sense design looks promising an (per marcin's question) I think we should pursue parallel development with the PSoC4 design. One conc...") |
m (→Aug 8, 2013) |
||
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
=[[Chuck Log]] to [[Paul Log]]= | |||
Your cap sense design looks promising | |||
=Aug 8, 2013= | |||
[[Chuck Log]] to [[Paul Log]]= | |||
Your cap sense design looks promising and (per marcin's question) I think we should pursue parallel development with the PSoC4 design. | |||
One concern is oxyfuel height tracking near edges & holes which would probably benefit from a multichannel sensor. | One concern is oxyfuel height tracking near edges & holes which would probably benefit from a multichannel sensor. | ||
Latest revision as of 03:16, 13 August 2013
Aug 8, 2013
Chuck Log to Paul Log= Your cap sense design looks promising and (per marcin's question) I think we should pursue parallel development with the PSoC4 design.
One concern is oxyfuel height tracking near edges & holes which would probably benefit from a multichannel sensor.
My time avail is limited so I expect you will have a prototype under test before I get too much further.
Carry on the good work!